Snoc Electronics

[rfourt]

i dont want to worry you as your driver board and adaptor seems more pro and new.

Also the beam is clearly alot better then te reds.

here are some pics of the red that i bought.

PS: check your PM´s for the power meter as i dont knowif im allowed to make any comersials for the dude selling the power meter yet.

As you can see in the pictures below the laser head has some serious scratches to it and the driver board is even missing some screws and the it clearly has been opened also the cables seems to be from an old traktor. ehehe.

although it still produces 800mw.

[Pitopito]

I think I was lucky... there are no doubts that your unit is not new at all.

Thank You for your PM, as I wrote you, I will probably buy it

[Insanity]

According to his advert the polarisation ratio on these is 50:1.. Not sure you will be able to mix them with a PBS...

so ill probably end up buying one more from him hehe. Im mostly going to run beamshows so i guess its ok. 2 of these toghether would atleast if im not totally wrong give me 1400mw?!=?

Cheers
Mark

[mikkojay]

I ordered a piece of dichro from these guys over a month ago and have yet to receive anything- the good news is that I FINALLY noticed some activity on the tracking number today. Man, overseas shipping is a pain sometimes
Detailed Results:
Origin Post is Preparing Shipment Foreign International Dispatch, January 06, 2011, 9:37 am, SHENZHEN, CHINA PEOPLES REP Foreign International Dispatch, December 10, 2010, 10:58 am, SHENZHEN, CHINA PEOPLES REP Foreign Acceptance, December 08, 2010, 6:49 am, PORTEE

[dave]

EMS seems to be very slow at the moment

[lasersbee]

I've dealt with snoctony for hundreds of dollars worth of
Lasers in the past year... And I have never had a problem
with them.
They are courteous... friendly and professional in their
communications.

Don't Forget that the Xmas season wreaks havoc with
the Global Postal Systems from 3 weeks before and after
Xmas...


Jerry

[epyn]

I bought from him last month a 808nm LD to change the burned one in my greenie(200mW)
I've purchased it(marked as) as 3000mW,but it says "i am 1W diode"
It died at 1520mA,and the voltage was 2,2V!!!!Too much for a 808nm laserdiode.
Datasheets point for c mount 3W 808nm LD: CW current is 3400-3600mA,not 1520mA!!!
I'd contacted him,waiting for his response.
Ferenc

[lasersbee]

I bought from him last month a 808nm LD to change the burned one in my greenie(200mW)
I've purchased it(marked as) as 3000mW,but it says "i am 1W diode"
It died at 1520mA,and the voltage was 2,2V!!!!Too much for a 808nm laserdiode.
Datasheets point for c mount 3W 808nm LD: CW current is 3400-3600mA,not 1520mA!!!
I'd contacted him,waiting for his response.
Ferenc

If it was marked as 1W LD... why did you drive it to 1520mA...
Plus we don't know what kind of Electrostatic precautions were
taken or what type of Driver that was used...


Jerry

[epyn]

As i said:
bougth marked as 3000mW
http://www.ebay.com/itm/140535017284...#ht_646wt_1064
I received an item that wasn't as described,and i paid for.
Thats all.
Driven by the original DPSS DHOM driver,and i have a lots of experience with electronics,have ESD wrist strap and tray.
Problem solved,i got a used diode from my friend,but my heart goes sad(and my purse also),i must buy an other diode,but never buy again from snoctony.
That was my first fleabay unpleasant experience.Don't wanna more...

[lasersbee]

As i said:
bougth marked as 3000mW
http://www.ebay.com/itm/140535017284...#ht_646wt_1064
I received an item that wasn't as described,and i paid for.
Thats all.
Driven by the original DPSS DHOM driver,and i have a lots of experience with electronics,have ESD wrist strap and tray.
Problem solved,i got a used diode from my friend,but my heart goes sad(and my purse also),i must buy an other diode,but never buy again from snoctony.
That was my first fleabay unpleasant experience.Don't wanna more...

I have never had a problem with Snoctony... If you have a problem I would
suggest you get a hold of the Seller and see what he says...
You have not mentioned if you even tried to communicate with him or what
he responded to you...

When you saw that the LD was marked "I am a 1W diode" as you stated above...
why did you over power it before contacting the seller...
Any resonable person would have questioned that 1W marking...
The Blown LD is your own fault from what you stated and not the fault of the
Seller.
The seller is responsible for send out the wrong LD if indeed you ordered a 3W...


Jerry