Results 1 to 5 of 5

Thread: fb3 @ 30kps

  1. #1
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,279

    Default fb3 @ 30kps

    is it possible to make the fb3 scan any higher than 30kps because i got flicker on some stuff on my old scanners, i just brought scanners from stanwax and it looks like they are happy to run at 40kps for some stuff

  2. #2
    Join Date
    Jan 2008
    Location
    Stockholm, Sweden
    Posts
    799

    Default

    Well, LiveQuick only goes to 30kpps in the settings. However, there is a scanrate slider in the live controls, and it goes to 200%. I don't know if the FB3 will actually do 60kpps then though.

    In LAStudio you can set the scanrate to 60kpps directly in the settings.

  3. #3
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,396

    Default

    Chris
    The scanners are tuned and rated @ 30k. This does not mean they wont go higher but the quality of the image will beging to suffer the higher you go. You must be scanning a lot of points for 30k to flicker....

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  4. #4
    Join Date
    Jun 2008
    Posts
    149

    Default

    puching them higher say to 45k damages them right? and in what way?

  5. #5
    Join Date
    Dec 2006
    Location
    Pflugerville, TX, USA
    Posts
    1,977

    Default

    Over heating or damage from over shooting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •