-
Scanpro 20 DMX addressing help
Hey Guys, I need to use my laser at a concert in 2 days, but I cant figure out why DMX isnt working. My DMX controller works, and I got a new DMX board from LSP, but it still wont work. It must be my DMX addressing. Does anyone know what I would have to set the dipswitches to?
Thanks
EDIT: Nevermind, figured it out. Just if anyone else is wondering, so set it at channel 1, Switches 1-9 are on, and 10 is off
Last edited by Things; 07-28-2008 at 01:38.
-
Have you looked in the manual ? Its on the second page of the manual for the DMX Board
-
DMX address
Maybe Switches 1 ON is DMX mode
Switches 2-10 is address, 2 high address value is 256, 10 low address value is 1.
address 2 3 4 5 6 7 8 9 10
value 256 128 64 32 16 8 4 2 1
when you start it at channel 1, set Switches 1 and 10 ON.
when you start it at channel 15, set Switches 1 and 7,8,9,10 ON.
-
Yeah, I know how to DMX address, I have an intelligent scanner and 2 LED par's, but its just the addressing system the laser uses that confused me! Anyways it worked fine for the concert!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules