
Originally Posted by
mixedgas
background spectra:
The excited gas produces all sorts of lines, but not all of them can lase. So if you look at a pure argon plasma, you will see some red and quite a bit of other colors, but not all of them are laser transitions, ie the tube is just acting like a neon sign.
Other then a slight trace of neon if you want to boost the 528 line, argon tubes are very high purity gas. The presence of any other gas takes away power from the argon lines. There is no helium etc in a Ar or KR ion laser, although it has been tried.
Primary argon laser lines are 514.5, 504, 496, 488, 476, 457, although there are others, including 528 and 1091 nm.
Krypton ion is also a pure gas, and it too gives off spectral lines that are not lasing, aka background. Primary krypton lines are:
676, 647, 568, 575, 530, 520 , 482 and a bunch of other weak lines.
Krypton and argon lase better at different pressures and magnetic fields.
A mixed argon/krypton tube is a compromise, depending on gas mix, pressure, optics and magnetic field. For various reasons, a mixed gas tube will always give off less total power then a pure argon or pure krypton of the same size.
A typical mixed gas tube would lase 676,647, 514, 520, , 488, and 482, and if your lucky, just a touch of yellow.
The two gases, when mixed can and will fight each other for energy, so what you get depends a lot on the tube current, which as it heats the gas , will cause pressure changes, and kr is very sensitive to pressure.
And KR has another variable, 647 and 568 share a upper laser level, and so do 530 and 568, So lines can fight each other , called simply competion, so the amount of 647 and 568 you get comes down to magnetic field.
So there is stray light, dont worry about it, all you want is max power on the lasing lines aways,
BTW, ar/kr ion and hecad are the only commericlaly produced ion lasers, but there aree about 100 more possible ion lasers that have worked in the lab, including selenium, iron, lead, tin, nitrogen, neon , xenon, oxygen, copper, etc
Dont get confused by the fact that HeNes and HeCads need mostly helium in the tube, the helium just transfers energy from the discharge to the lasing ion.
Steve