Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Help, blu-ray pointer assembly

  1. #1
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Post Help, blu-ray pointer assembly



    I just received a blu-ray diode from my favorite gettin place and now have in my hands one of kenom's tubes, dr lava's older driver, and a "150mW" blu-ray diode. I think I need a lense and... assistance.

    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  2. #2
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    i recently made my own 190mw 405nm pointer

    http://www.laser-man.co.uk/2006/inde...id=86&Itemid=6

    im guessing you need an aixiz lens and diode press

    http://www.laser-man.co.uk/2006/inde...d=11&Itemid=40
    Eat Sleep Lase Repeat

  3. #3
    Join Date
    May 2008
    Location
    Kaliningrad, Russia
    Posts
    45

    Default

    Quote Originally Posted by andy_con View Post
    ... and diode press
    Never heard about diode presses - cool jig! I like it, well done!

  4. #4
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    i have some for sale, it makes putting a diode into the aixiz case very very easy and puts the diode in straight
    Eat Sleep Lase Repeat

  5. #5
    Join Date
    Jul 2008
    Location
    Eugene Oregon
    Posts
    952

    Default

    you dont necessarily need a diode press you can turn the back half of the module around and use that as a press works perfect!


    HOLD ON
    but it looks like that host is milled to fit a diode right into it?
    (the circle in the middle of your pic)

    does it also have a lenses? if not you will have a hard time focusing it all in.
    -Josh

  6. #6
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    The "tube" is one of Kenom's first GB runs. There are threads to hold a lense after you pop the diode in.

  7. #7
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,396

    Default

    good to see you following FULL static precautions there andy

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  8. #8
    Join Date
    Jul 2008
    Location
    Eugene Oregon
    Posts
    952

    Default

    alright if it hold the lense then you could go out and buy a aixiz and use the back half as your press and then the lenses part for this build
    -Josh

  9. #9
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by stanwax View Post
    good to see you following FULL static precautions there andy

    Rob
    what?

    static??

    Eat Sleep Lase Repeat

  10. #10
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    andy that thing is 190mW? That's a good diode from an XBOX.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •