Results 1 to 9 of 9

Thread: How is your experience with LASERWORLD laser systems

  1. #1
    Join Date
    May 2008
    Posts
    10

    Default How is your experience with LASERWORLD laser systems

    Hi,

    do you have experience with laserworld PRO and revolution series of RGB, RGY or single laser???
    Which do you suggest?



    THNX

  2. #2
    Join Date
    Jan 2008
    Location
    Belgium
    Posts
    1,009

    Default

    While I do not own any pre made systems, I get the impression that you pay for much more than you get with laserworld ...

  3. #3
    Join Date
    Jul 2008
    Location
    Eugene Oregon
    Posts
    952

    Default

    i think most pre made projectors are that way.

    you pay a lot for the completed design and labor that can go into a projector
    -Josh

  4. #4
    Join Date
    Jul 2008
    Location
    Germany, near ESSEN
    Posts
    12

    Thumbs down

    Hi,
    Laserworld is german reseller who sells china products at most.

    @Laserfreak.net you can read stories about many german people who have bought one and now they are reassembling the prebuild lasers projector for building their own ilda projector
    Look at the amazing 50k scanners from Laserworld

    You will change the most parts of the projector later on if you continue with the new hobby...
    Like dichros, galvos, wiring, mirrors... and so on...

    In my opinion the best, cheapest and funniest way is: DIY

    cu
    yosh76

  5. #5
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    I think it would be nice if they would sell just the enclosure. It has all the "needed" parts, interlock, key lock, shutter... Let em put in my own dichros and lasers. I'd gladly spend a few hundred on a complete box that is safe and all.
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  6. #6
    Join Date
    Mar 2008
    Location
    Mantova (Italy)
    Posts
    89

    Default

    Well, I think they do...Every month they send me a mail copy of their catalog because I purchased some lasers and 50k galvos from them. If I remember correctly, they have just started to sell enclosures but they are expensive, as I think they already contain dichros or at least scanners. They say that you can put your personal laser modules in it, so I guess the rest is already in there...

    All the best!
    Giovanni

  7. #7
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    They do just sell the enclosure - 1,608 Euro - about 1,300 or about $2,600 for an RS enclosure(includes scanners and fans I think). However, thats more than most people pay for the entire projector when bought via auction and if you're rebuilding yourself, what happens if not all your components fit???

  8. #8
    Join Date
    Mar 2008
    Location
    Mantova (Italy)
    Posts
    89

    Default

    I completely agree...I thought from the very beginning that enclosure is not interesting at all...

  9. #9
    Join Date
    Aug 2008
    Location
    Freiburg, Germany
    Posts
    124

    Default

    well so far for me its been a little bumpy

    got a 750 proline RGB from fleabay for 1700 inc shipping (COD too wkd)

    all was good but being a noob things didnt come to quickly to my attention


    1st - realised the colours were not right so had to retune the dichros to get the colour blending right, this also involved taking out bits of metal which were raising the green laser far to high

    the mirror adjustments were very hard to adjust easily since the screws were so badly ressessed on some of the mounts - using electrician pliers to adjust which is a real pain!

    still not sure about the system tho, since the red (635nm) goes over the scanners and makes a beam going verticaly which seems brighter than the main one (might be wrong tho). Also i'm not sure the blue is up to 100% strength as it seems a bit grainy, but its the first blue laser i have seen - and to boot the lasers inside have had some black ink 'censorship' hiding the real values, i really dont like that one bit! i would really really like to get it tested, gotta friend who works with lasers so he might have something i can measure it with hopefully!!!

    BUT its pretty impressive bit of kit, well ventillated and cant wait to get it to its full potential! ohhh and it came in a rock solid wheeled flight case

    customer service so far has been good too, waiting on the replies tomorrow for more information from them

    will also do a review on them to let u know how this all pans out

    best wishes

    rich
    http://inselaffe.org

    http://www.myspace.com/majorleeblunt

    An Eye for a Eye only makes the World Blind - Ghandi

    Laserworld 750mW Proline RGB
    Laserworld Quad 400mW RG
    Lanta 180mW RGY

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •