James, The ScanPro20's come with a controller board that is refered to as a DMX board, It is a basic controller that has Sound-Activate Mode on it, And a few built in Frames for use with DMX, the Board has DMX in/out and ILDA in/out aswell as 3xTTL Laser Outputs. The ILDA in/out have ribbons to DB25 socket/plug. I have wired up mine to the ILDA in, but no look. I have the Laserboy DAC wired to DB25 as ILDA Standard Pinouts.
1 X+
2 Y+
3 Intensity +
5 R+
6 G+
7 B+
14 X-
15 Y-
16 Intensity -
18 R-
19 G-
20 B-
25 Ground
Here's the Manual for the DMX/Program Board -->
http://www.lasershowparts.com/files/...NPRO/20KPB.pdf