Results 1 to 8 of 8

Thread: 405nm again

  1. #1
    Join Date
    Jun 2008
    Location
    chesterfield uk
    Posts
    466

    Default 405nm again

    hi

    iv been thinking about 405 for a while and at the moment there is a deal on them on ebay. its for 150mw without the driver board and they are about £22 they also have them with for about £40. i was thinking about getting it but i just wanna know if anyone knows what the sort of mw to mw ratio is with them. for example if i had 100mw of green how much 405 would i need to be as bright. im reckoning if i buy 3 it should make quite a bright blue.

    what do people think????

    im still thinking of adding these to my f 2000 and maybe even my new rgb from pinkem maybe 2 in the pinkem and 3 in the f2000. any help with how i would do this is greatly appreciatied.


    ollie
    2 x 10w full colour laser systems
    2 x 4w full colour laser systems
    2 x 3w full colour laser systems
    1 450mw pinkem rgb 30k scanner
    2 x 1 watt green laser
    4 x 1 watt blue 445nm laser systems
    3 watt rgb .

  2. #2
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    avoid buying them from ebay.

    the diodes arent 150mw
    Eat Sleep Lase Repeat

  3. #3
    Join Date
    Jun 2008
    Location
    chesterfield uk
    Posts
    466

    Default re

    doesnt suprise me to be honest. i dont think any diode on there is what spec it says. is there any where i can get propper 150mw blue ray diodes from with prices?

    cheers ollie
    2 x 10w full colour laser systems
    2 x 4w full colour laser systems
    2 x 3w full colour laser systems
    1 450mw pinkem rgb 30k scanner
    2 x 1 watt green laser
    4 x 1 watt blue 445nm laser systems
    3 watt rgb .

  4. #4
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    i made a post yesterday about cheap 803t diodes.

    they are good for 100mw anymore and its anyones game as to how long they will last.
    Eat Sleep Lase Repeat

  5. #5
    Join Date
    Jun 2008
    Location
    chesterfield uk
    Posts
    466

    Default which thread was it in

    which thread mate?


    cheers
    2 x 10w full colour laser systems
    2 x 4w full colour laser systems
    2 x 3w full colour laser systems
    1 450mw pinkem rgb 30k scanner
    2 x 1 watt green laser
    4 x 1 watt blue 445nm laser systems
    3 watt rgb .

  6. #6
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,648

    Default

    check the buy and sell section
    Eat Sleep Lase Repeat

  7. #7
    Join Date
    Jun 2008
    Location
    chesterfield uk
    Posts
    466

    Default nice one

    ill give it a try mate thanks.

    ollie
    2 x 10w full colour laser systems
    2 x 4w full colour laser systems
    2 x 3w full colour laser systems
    1 450mw pinkem rgb 30k scanner
    2 x 1 watt green laser
    4 x 1 watt blue 445nm laser systems
    3 watt rgb .

  8. #8
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    i run them @ 125mW (with plastic lens) for long periods of time when in a proper heat sink..
    Quis custodiet ipsos custodies?
    Solid State Builders Group

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •