Results 1 to 5 of 5

Thread: DT-Series Scanners

  1. #1
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,107

    Default DT-Series Scanners

    Hello folks, just wanted to pass the word that I am now the current distributor for the DT-Series scanners and I will also be covering warranty repair and service. I will try to keep several sets on hand so they can be shipped quickly, I also have several spare parts in stock to attempt a quick repair here instead of having to ship back to China. Please visit www.dzelaser.com on the "Products" page for more details!

    Thanks,
    David

  2. #2
    Join Date
    Aug 2007
    Location
    Portland
    Posts
    1,354

    Default

    Great to hear!

    Mine are working real well right now as should be expected. :-)

  3. #3
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,107

    Default

    Great to hear!

    Mine are working real well right now as should be expected. :-)
    Thats good! And if you have a problem with them, now you have someone a little more local to contact! I am really happy to see some new changes on these scanners. I'm guessing maybe all of the recommended changes by Pangolin were implemented. There are two mirror sizes for the DT-40Pro's, the amp for the one with the larger mirrors appear to be nearly the same as before, whereas the amp for the one with normal size mirrors is a bit different. No HFD pot! To re-tune, you have servo gain and LFD, and thats it! I tuned one to 30K last night and it took all of 5 minutes.

  4. #4
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,279

    Default dt40s

    hi i just dt4opro's with large mirrors they scan very well and no noise at all
    but i have a question for dz i need to invert x axis as everything is displayed back to front are the two jumpers next to the notch filter for this and how do i config them??
    thanks
    chris

  5. #5
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,107

    Default

    Quote Originally Posted by badger1666 View Post
    hi i just dt4opro's with large mirrors they scan very well and no noise at all
    but i have a question for dz i need to invert x axis as everything is displayed back to front are the two jumpers next to the notch filter for this and how do i config them??
    thanks
    chris
    Hi Chris, yes, the 4 pin jumper block next to the notch filter is used to invert the signal. Basically, set the amp on a table with the heat sink bar away from you, if the jumpers are horizontal, change them to vertical, or vice versa.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •