Results 1 to 4 of 4

Thread: FS - Argon ALC68 based whitelight system + PSU + PCAOM + Cooling Fan

  1. #1
    Join Date
    Jan 2008
    Location
    South Lincs, UK
    Posts
    2,625

    Default FS - Argon ALC68 based whitelight system + PSU + PCAOM + Cooling Fan

    I have decided to sell my Argon Ion ALC68 based whitelight laser system.

    It comprises of the reconditioned ALC68 head, reconditioned PSU, NEOS 8ch PCAOM (only 5 channels work for some reason ) all housed and fanned up in a plastic enclosure with internal PSU, A 20K scanset and added 200mW 650nM red diode module. Beam dumps have been fitted to catch those stray beams plus has a 3 way dichro mount holding the 45 degree bounce red dichro.
    Gives a lovely strong white output with the tube running at 20A
    ILDA socket on the rear of the head.
    Runs off 230vAC mains voltage at around 30A current.
    Comes with an external cooling fan and all associated 110mm flexi pipework, 'T' pipe and quick release stainless steel clamps. It also has an exhaust digital temperature meter with fitted thermocouple sensor in the exhaust chimney.
    Comes with 15meters of 3 core YY type 4mm cable with plug to fit PSU - ready to wire into your house consumer unit

    The original head clean up thread and the addition of the PCAOM, Scanset and red.
    http://www.photonlexicon.com/forums/...ead.php?t=4308

    The PSU strip down and clean up thread.
    http://www.photonlexicon.com/forums/...ead.php?t=5052

    Video of it running along side my S/State RGB
    http://www.photonlexicon.com/forums/...ead.php?t=5355

    Looking for £1600 OVNO - ALL OFFERS CONSIDERED

    Cash on collection, Direct bank transfer, postal orders , Paypal accepted but ONLY if you send via the 'gift route and YOU pay the fees!

    Buyer must collect, Surfleet South Lincolshire UK.

    WARNING - It's rather heavy

    Some more pic's below:
    Attached Thumbnails Attached Thumbnails IMG_2301.JPG  

    IMG_2307.JPG  

    IMG_2308.JPG  

    IMG_2309.JPG  

    IMG_2306.JPG  

    IMG_2305.JPG  

    IMG_2304.JPG  

    IMG_2303.JPG  

    IMG_2300.JPG  

    IMG_2252.JPG  

    IMG_2255.JPG  

    IMG_2258.JPG  

    Last edited by smogthemog; 10-16-2008 at 21:14.
    --------------------
    My Brain urt's!

    Continuously in Awe! of (H)Al, the Photonlexicon Font of Complete Knowledge - The (H)Al'PL Database of complete puss that no one needs to know or ever trusts as he ain't really got a Scooby doo about now't!

  2. #2
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    Nice setup!
    wish i was closer!

  3. #3
    Join Date
    Jan 2008
    Location
    South Lincs, UK
    Posts
    2,625

    Default

    The laser is full analog modulation and not TTL.

    It will run without all the cooling pipes by the way but you cannot run it at 20A tube current for long as the tube will overheat and the temp sensors will trip and turn off the PSU.
    It will run happily at 14A tube current just drawing cool room temperature air but as long as you are not slowly filling the room with hot air from the exhaust

    It does quickly heat a room up and is a good central heating boiler

    The PSU has all new capacitors in it.
    --------------------
    My Brain urt's!

    Continuously in Awe! of (H)Al, the Photonlexicon Font of Complete Knowledge - The (H)Al'PL Database of complete puss that no one needs to know or ever trusts as he ain't really got a Scooby doo about now't!

  4. #4
    Join Date
    Jan 2008
    Location
    South Lincs, UK
    Posts
    2,625

    Default

    £1250
    I need to get rid of
    --------------------
    My Brain urt's!

    Continuously in Awe! of (H)Al, the Photonlexicon Font of Complete Knowledge - The (H)Al'PL Database of complete puss that no one needs to know or ever trusts as he ain't really got a Scooby doo about now't!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •