Results 1 to 7 of 7

Thread: Draw3D Optimization Guide

  1. #1
    Join Date
    Dec 2007
    Posts
    284

    Default Draw3D Frame Optimization Guide

    Hi!

    Some of you have released some really nice laser frames.

    Because most of them don't always display flicker-free I wrote a small guide on how to improve the frames for laser output with LAStudio Draw3D.

    Of course optimization can be done in many ways, this is just one (and btw... it's gonna mess up the colors, so you will have to recolor manually afterwards). Play with the optimization settings for each frame individually and find out which results look best on your projector. I included some of my traces.
    Btw... always keep your original frames! Never overwrite!

    (Limitation: Draw3D can only optimize one selected frame at a time, not all frames in one .ild / .lpc at once. Alexey stated to me that he might improve this in a future version )


    (This thread refers to Draw3D only, so please... don't post anything like "I get much better results with software xyz". )


    Greetings... decix
    Attached Thumbnails Attached Thumbnails Draw3D_Optimization_Guide.pdf  

    Attached Files Attached Files
    Last edited by decix; 11-01-2008 at 13:33.

  2. #2
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Nice!!

    Thanks for posting!!
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  3. #3
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    I'll try it later. Thanks

    Rich

  4. #4
    Join Date
    Jan 2008
    Location
    Bonnie Scotland
    Posts
    69

    Default

    Thanks for Shareing

    I will try it soon

    Cheers
    2 WATT DPSS RGB

  5. #5
    Join Date
    Apr 2006
    Location
    Deutschland / NRW / Hamm
    Posts
    54

    Talking

    Homer ergab :



    Ebenso speichert TraceIt *.ldb so genial , das sogar Pangolin versagt.

    Gento

  6. #6
    Join Date
    Dec 2007
    Posts
    284

    Default

    Hello Gento, nice to see you're enjoying my frames. I saved those with a newer build of Draw3D-QM2000 that Alexey sent me for evaluation. Obviously it's not compatible with your beta-version (6 b7). Deleted them.
    Concerning TraceIT... it cannot save .ldb.

    ---

    Hallo Gento, schön das Dir meine Frames gefallen. Ich habe sie mit einem neueren Build von Draw3D-QM2000 gespeichert, welches Alexey mit zum Testen zur verfügung gestellt hat. Dies ist offenbar nicht kompatibel mit deiner beta-version. Habe sie gelöscht.
    Was TraceIT angeht... es kann gar kein .ldb speichern.
    Last edited by decix; 11-01-2008 at 13:38.

  7. #7
    Join Date
    Apr 2006
    Location
    Deutschland / NRW / Hamm
    Posts
    54

    Default

    Ich verzeihe einem Grünschnabel den Satz mal : Was TraceIT angeht... es kann gar kein .ldb speichern.
    Wie lange machst Du auf Laser ?

    365 Std ( )
    365 Day's ( )

    lg Gento
    Attached Thumbnails Attached Thumbnails New.gif  


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •