Helping a noob building a scanner (15k RG)

[Firestarter]

So here are the pictures of the big "?" for me.
Maybe someone can help me figuring out how to wire up the easylase to the scannerdriver.

PLEASE !!!!

[Steve Milani]

Sorry Mate...
Best I can do it's only give you the list of *standard* wiring connection of D25 ILDA connector.

http://www.laserworld.com/fileadmin/...ox-open_en.pdf


Cheers.
Steve

[andy_con]

using the standard 25pin ilda connector

connect pin 1,2 and probably 25 to XYG on the scanner amp. i think the 15k uses ground rather than XY -

you then need to connect your lasers using the RGB + and - on the 25pin connector

[Firestarter]

Ok this may sound stupid ... but ... could someone point out the connection on the laserdriver where the cables need to be placed :/

[andy_con]

you need to look in the instructions as i cant remember off the top of my head.

its one of the ones next to the big black chip. 3 connectors

[Steve Milani]

After I well looked at your scan driver card on pictures you posted, I suggest you to send a PM to Dave (www.lasershowparts.com).
Your card seems me alike an old model (called "scan 10 eco") sold, times ago, as well from lasershowparts.
I think he can help you.

Good luck.

Steve

[Firestarter]

Hi Andy.

Thx alot for that. I thought it has to be the one between the amp connections.
Now i just have to figure out which of the tiny cables is connected to which pin (that should be easy)
There are 25 pins and 25 cables .. so nothing should be bridged or anything.




Next thing i would have to know is how to power up everything.... maybe there is somewhere a manual around showing how to create the setup for easylase + k12n + 3 lasers.

[Firestarter]

Ok here is the next step:

I wired the scanners up and put some power on them.
The scanners moved to their starting position thats it

Here are some pictures of what it should look like...








btw...: i was REALLY SCARED of switching them on for the first time but nothing went up in smoke or started flying around so i'm fine now