Some used scanners for sale!

[dave]

Continuing with the clean out

I have a set of JMlaser M9024 'widemove' scanners to move on.

These are used, but are still in great working order.

As a bonus, I have a set of unused mirrors to suit this set. Fitting them is very easy,and i will include them at no extra cost(they cost me 50euros)




Would like to get $700AUD for this set plus shipping.. That equals around~$460USD! Cheep!!

[sbk]

These scanners are just unusable and unkillable, I have them for a long time, absolutely no heat from scanners (the driver gets only warm) and you get the biggest scanning angle without sacrifying scanning speed

But, as I already have them, but the coating of my mirrors are I think dead (35-40% loss on 532nm, but strange, only 17% blue and 3% red), is there a way or another to get from you only the set of spare mirrors?

[dave]

is there a way or another to get from you only the set of spare mirrors?

Yeah, but you have to buy the scanners

[sbk]

That's what I was thinking.

However, if the buyer of the scanners don't care to have extra mirrors, you can reduce the price of the scanners by the price you sell me the mirrors, making them more attractive

[Lasermad]

any idea of history / usage .. im intersted but they are new 550 euros from medialas ..ideally looking to save a fair bit more ;-)

[dave]

Hi Paul,

History.. We bought them new, used them for a handful of shows, and they have been sitting round unused for the best part of a couple of years..

Before cash changes hands, Ill run them up and give them a once over tho..

Well 550euros equals just over 1100 Australian, so that's quite a bit more

Make me an reasonable offer and Ill consider it I guess.. I can come down a little bit more, but any more than a little and it becomes a exercise in loosing money

[sbk]

I can come down a little bit more

And selling the spare mirrors to someone else with help a little more (I know, I'm boring)

[Lasermad]

How does 450 AUD sound and you can sell the mirrors to ...mmm ... the persistant one

[dave]

How does 450 AUD sound and you can sell the mirrors to ...mmm ... the persistant one

The thing is, I think you will need a spare set of mirrors. These mirrors have a few scratches on then from poor cleaning attempts..

Why don't you just buy a set from JMlaser SBK?

I will drop to $600AUD plus shipping, but I cant go lower than this

[sbk]

Ah ok so if there's scratchs on the original mirrors, that's another story...

I was just hopping an opportunity to have these mirrors for a lower price, since I've already exceeded the max allowed budget for lasers theses times
This being said, I'll ask JMLaser and hope they still have some (since I heard they didn't make any M9024 scanners...).