hey guys here are some pics of a score that i got a few months ago
from an optometry school
now i just have to get them to lase
what i got is one sp168 plus two 265exciters
one laser ionics 554a with PS and a buckboost
--
John
VJ AIWAZ
hey guys here are some pics of a score that i got a few months ago
from an optometry school
now i just have to get them to lase
what i got is one sp168 plus two 265exciters
one laser ionics 554a with PS and a buckboost
--
John
VJ AIWAZ
Last edited by VJ AIWAZ; 01-24-2009 at 03:20.
Shit man - what a deal!
Even if you only get one working thats mega! Is the 168 an argon, a krypton, mixed fill or unknown? You can tell from the serial no. on the silver label on the rear of the base plate near to wher the umbilical comes in, what it was when new though it may not be that now but it could still be. If you have the code I can look it up in the manual and tell you what it should be.
Have you got 3 phase to run it? Very power hungry but they are wonderul when working. Keep the pics going of your progress.
Rob
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
from what i was told they are both argon i was suposed to get a second 168 but when i opened up the medical table only one had a head but both had exciters
and the laser ionics / ps / buckboost was not in a table
so what i ended up geting is 2 full medical tables (mira console) with footswitches and console for pulse duration the only thing missing was one laser head
then the laser ionics system was seperate
Those SP 168's great lasers!
what a score!
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
no i think you misunderstood
the table was a treatment table and i got 2 whole tables that had one sp168 in them each
Last edited by VJ AIWAZ; 10-26-2008 at 09:38.
Ahhh OK - there are some tables out there that had x2 SP168 sitting next to each other, one an argon and one a krypton. There used to be some pix on ANdy Clearys site Ajax electronics but its no longer there. Shame.
I did wonder why there was 2 265s as the dula set up only appeared to have one.
Cool to have a spare though - I wish I had a spare
Rob
If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
-----------------------------------------------------------------------------------------------
Laserists do it by the nanometre.
Stanwax Laser is a Corporate Member of Ilda
Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
www.photoniccleaning.co.uk
here are some more pics of the other stuff i got and the insides of the 2 lasers
you can see the table under the laser ionics i got 2 of those i kept one and the other is in my yard i also kept the delevery system off both its this big arm with a bunch of optic
at this point i would trade one whole system and the xtra exciter(parts and labor) to any one who gets one up and running for me(either one)