clicking on my avatar will show the tricolor photocoagulator resonator cavity from a Lumenis Varia eye surgery medical laser, which i am attempting to refit. It originally was designed to produce 50-1500mw of 532 / 50-600mw of 659nm / 50-600mw of 561nm (Yellow)
Clicking on my Avatar will show a picture of the inside of this cavity with a 1cm bar diode in the first of 3 OEM postions & KTP holder.
Caviar Dreams on pennies, well lots of pennies.
Would it be possible to produce a dif laser by 382nm UV diode laser with a 910nm IR
What would prevent this from being feasible 910nm-382nm-=528nm?????
davesplaysView Public ProfileSend a private message to davesplaysFind More Posts by davesplaysAdd davesplays to Your Contacts
T, 12:50 PM #2 Redbelly98
Melanerpes carolinus
Redbelly98 is Offline:
Posts: 1,602
Blog Entries: 4
Recognitions:
PF Contributor
Homework Helper
Re: Would it be possible to produce a dif laser by 382nm UV diode laser with a 910nm
Other wavelengths are produced by taking the sum or difference of the frequencies, or of 1/λ.
So using 910 nm and 382 nm:
1/382 - 1/910 = 0.001519
and
1/0.001519 = 658
So this would produce light at 658 nm. However, there must also be a nonlinear crystal that would work at these wavelengths, and I am not sure if that is the case.
clicking on my avatar will show the tricolor photocoagulator resonator cavity from a Lumenis Varia eye surgery medical laser, which i am attempting to refit. It originally was designed to produce 50-1500mw of 532 / 50-600mw of 659nm / 50-600mw of 561nm (Yellow)
Clicking on my Avatar will show a picture of the inside of this cavity with a 1cm bar diode in the first of 3 OEM postions & KTP holder.
Caviar Dreams on pennies, well lots of pennies.