Results 1 to 6 of 6

Thread: how do you work out mrad of a laser

  1. #1
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default how do you work out mrad of a laser

    how do you work out the divergence of a laser ? if you started out with a beam at 5x5 mm and the beams 12x12 at 8m whats the divergence for that laser ?
    just one of those things i want to learn

  2. #2
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,406

    Default

    go back to you trig. from school
    I think its the same as calculating scan angles except using smaller values that translate into fractions of degrees.
    You should be able to use the formula thats used on the pango scan angle page http://www.pangolin.com/userhelp/scanangles.htm
    though you may need to take into account that you are starting from 5mm instead of zero - Im very rusty on this too!

    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

  3. #3
    Join Date
    Jan 2008
    Location
    Stockholm, Sweden
    Posts
    799

    Default

    Beam divergence formula:

    Where Df and Di are the beam diameter at two separate points and l the distance between them.

    In your case I get 0.9 mrad. Remember to have everything in SI units.

    Just write it like this in google: http://www.google.se/search?q=2*arct...-0.005)%2F(2*8))

  4. #4
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default found an easyway to do it

    found an easy way to work it out
    http://www.pseudonomen.com/lasers/ca...alculator.html

    that saves damage to the grey matter

  5. #5
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    there used to be a GREAT calculator floatin around somewhere for this...

    wish i remembered

    -Marc

    **EDIT**---oops, just saw your post above! lol...there ya go!
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  6. #6
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    9,890

    Default

    you put a razor blade on a micrometer stage, you measure the total power of the beam, you insert the razor blade until you are at 82% of origional power. you note the measurement, you then decrease the power to 13%. You PM mixedgas and make him post the %$#$@ approximation equation, you plug and chug some junior high school math. Voila, gaussian beam diameter at one point. Then you do it again 1 meter / 1 yard down the beam. You plug and chug the second set of the numbers into a (*&^ing 9th grade equation. Voila , divergence. Or you buy a system from sphericon, or you send your laser to mixedgas and he uses his sphericon. Sphericon systems use a calibrated CCD camera without a lens on a slidning rail. They do a hell of a lot more then measure divergence.

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •