100W DPSS Laser Modules

[Sino-Laser]

Module SN: SL6TH4


Specifications:
Module Type: GN100 (Typical 100W 1064nm CW Output)
Diode Type: 15x40W Laser Diode Bars
Nd:YAG: 3x90mm, 0.6% Doping
Operating Current: 0-38A (Do not exceed 40A)
Typical Operating Current: 30A
Operating Voltage: around 25-28V

Burn-in-test Data Sheet


Conditions:
Chiller Temperature: 21 Deg.C (18-27 Deg.C Recommended)
Water Flow Rate: around 9 L/Min
Cavity Length: 500mm
HR: Plane, R>99%
OC: Plane, R=80%
Burn-in-test for 48 hours
Warm up time: 5-10 minutes to reach heat balance
Output Stability: +/- 1.5 %

Data Sheet:

Current (A) / Output (W) / Voltage (V)
10 / 1.4 / 25.5
12 / 9.6 / 25.67
14 / 21.5 / 25.84
16 / 35.2 / 26
18 / 48.7 / 26.14
20 / 55.0 / 26.28
22 / 63.3 / 26.42
24 / 75.6 / 26.54
26 / 85.7 / 26.67
28 / 93.2 / 26.8
30 / 101.8 / 26.88
32 / 115.6 /27
34 / 125.4 / 27.21


Test Date: 2008-10-27 to 2008-10-29
Engineer ID: 201

[Lasernerd]

How much $$$$?????

[Sino-Laser]

How much $$$$?????

Please send me an email for quotation.

liyang@sino-laser.com

[Sino-Laser]

Here attached one of the burn-in-test result for our recent delivered 100W DPSS laser modules. Please take it as reference.

It can exceed 120W output power in long cavity length of over 500mm !