hi anyone know do i need any special lens to collimate 635nm 5.6mm can
diodes, 1 want throw 100mw of 635 in with my multidiode 660
and where can i find a diode at a reasonable price
thanks
chris
hi anyone know do i need any special lens to collimate 635nm 5.6mm can
diodes, 1 want throw 100mw of 635 in with my multidiode 660
and where can i find a diode at a reasonable price
thanks
chris
If you find out, please post - a LOT of us would like to find out about that, especially now that some of the new 660/635 dichros are circulating!
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
2 -12 deg wedges work well if they are AR coated. Alignment is somewhat tricky. Reading / research is a must here. This goes way beyond the simple premounted anamorphics. Ther is another way....expensive...but simple. Hybrid lens that incorporates both axis in a usable manner.
You are the only one that can make your dreams come true....and the only one that can stop them...A.M. Dietrich
i asked a friend well it not somthing for us mere mortals to do its only for the laser gods the one's that actually know what they are doing
what we need is more of them melles griot moduals about then we could give it a go i would like to find one and hack it and fit some thing bigger in it but i have not seen any on ebay for ages
They have a *very* nice lens in them too ($250usd new from MG,) in addition to the prism pair. They come with a low power 9mm LD glued into place. No clamp. Metal fabrication is required to put a new diode in them.