Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: New laser lover^^ Need some help :)

  1. #1
    Join Date
    Nov 2008
    Posts
    13

    Lightbulb New laser lover^^ Need some help :)

    ey guys!
    I have in longer time been looking for some lasers, and have now brought a laserworld RS-500RGB laser..
    I also brought a ILDA DAC from them, the "Laserworld open usb box for LASER SOFTWARE (ILDA/DMX)"

    Anybody knows what software this DAC will work with?
    Also, Moncha looks like to be a really nice apps... any way to get my DAC to work with that app?

    Hope you guys can help me, and i must say after reading a bit on your forums it helped me understanding a lot^^

    Great forum!

  2. #2
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Smile

    Hi Tori!
    Welcome aboard on PL.

    As you know Laserworld has its own laser software: Showeditor 2008.

    I am not 100% sure but a friend of mine (a good Italian laserist) told me that DAC *open USB box* can works whith "Mamba Black" also.

    Unfortunately I have never tried before now this drivers, because I haven't any version of Mamba. I play my shows by Showeditor2008. So I can't tell you more about, sorry...

    Surelly other PL's Seniors Members can help you.

    Anyway I attach here the folder which inside are drivers you should need.
    (by permission of *Cruch* , downloaded from ftp://ftp.ildaswap.net/)

    Greetings and... welcome on PL one more time!

    Steve
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  3. #3
    Join Date
    Nov 2008
    Posts
    13

    Default

    Ty for fast reply..

    Ehm, would this box i brought work with Showeditor2008?

  4. #4
    Join Date
    May 2008
    Location
    Once it was called "Bel Paese" = ITALY
    Posts
    858

    Default

    I have two DAC/USB units: first one is the "master" unit, which contains the *dongle-key*. Second one unit is a "slave unit".
    Software don't start without to connect the "master" unit. Then, if I need it, I can connect second DAC unit (slave). Software don't start if I connect the "slave" DAC only. but you have to know that both my DAC units are 1,5 years old...... maybe new models can do much better......

    Looking at Laserworld site you can read that *open box USB" CAN work with others software.
    http://en.laserworld.com/en/laser-ac.../hardware.html


    Anyway... you try to download from Laserworld site the trial version of Showeditor and test it with your open DAC.
    To try don't cost you none

    Greets!
    Last edited by Steve Milani; 11-22-2008 at 05:22.
    my webpage
    http://stevemilani.jimdo.com
    Skype ID: stevemilani957

    my RGB analogue projectors:
    3.9 W (640/532/445) 30kpps
    2.6 W (655/532/450) 30kpps
    2.5 W (638/532/450) 30kpps
    0.7 W (test unit)(635/532/473) 18kpps

  5. #5
    Join Date
    Nov 2008
    Posts
    13

    Default

    hmm, you said mamba black..
    Let me ask ya, were can i get mamba black?
    I only need software?
    Whats the price?
    Any demo i can try with my DAC to see how it works?

  6. #6
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

  7. #7
    Join Date
    Nov 2008
    Posts
    13

    Default

    that demo is limited? wont let me try the laser^^

  8. #8
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default

    Yes, you need the full version to run the laser. When you buy the full version, you get a dongle that contains the lisence and enables laser output..

    I think most laser software will only demo on the PC and not through the laser..

    Mark

  9. #9
    Join Date
    Nov 2008
    Posts
    13

    Default

    people talked about a cracked version?
    Are there one?

    I will buy the software, just nice to see how it works and how good it really is before i buy..

    Whats the price on Black Mamba and dongle...

  10. #10
    soforene's Avatar
    soforene is offline The Troll formerly known as Herbert Von Poople-Futtocks
    Join Date
    Aug 2007
    Posts
    2,928

    Default

    Quote Originally Posted by Tori View Post
    ...I will buy the software..
    Then you'll be able to see how it works with the laser output.
    Asking for a "cracked" version marks you down as pirating scum.
    And I'm sure you wouldn't want the nice folks round these parts to think that, would ya.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •