Results 1 to 3 of 3

Thread: How do I set dmx address on an FB3

  1. #1
    Join Date
    Apr 2008
    Location
    Indiana
    Posts
    92

    Default How do I set dmx address on an FB3

    I'm lost... no dip switches and nothing in any of the software I can find... help.
    Fear Fair - Indiana's Scariest Haunted House
    www.FearFair.com

  2. #2
    Join Date
    Jan 2008
    Location
    Stockholm, Sweden
    Posts
    799

    Default

    No dip switches? Are you sure you have the DMX board? On the DMX board there are switches to set the starting channel. To set it to channel 1 you set switch 1 and 0 to on and 2-9 to off. To set it to a higher channel flip switches 1-9 to get starting channel Σ(2^(n-1)).

    See the attached picture for the FB3 DMX board. Ignore the red circle.
    Attached Thumbnails Attached Thumbnails FB3_DMX_front.jpg  


  3. #3
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    AND, the DIP switches on the board are TINY, BTW - it actually looks like another IC chip on mine!

    Do you have a copy of the FB3 DMX implementation chart?
    That might come in handy...
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •