Hey guys, my first laser

[mliptack]

When did you purchase it?

[Snilton]

exactly one week ago

[Snilton]

This unit is definatly faulty.
Kept it running for about a minute and it started flickering and turning up and down in intensity.

[oliverst14@hotmail.com]

omg, thats really terrible looking. It looks like they dropped it out of the delivery truck and ran it over.

i laughed my head off wen i read this

[ljk]

Just to give a comparison of the 50-100 mW 532nm laser that I received from AixiZ last week.

Image 1:
Laser head 10' from wall pot set about mid way

Image 2:
Laser head 10' from wall pot set fully on

Image 3:
Looking at laser head full power

Image 4:
Laser head 10' from wall pot set about 1/2 way 3 to 3 1/2 mm


I hope this helps out.

[Lasernerd]

Its definatly bouncing inside:
Attachment 4720
Attachment 4721

Should i talk to Aixiz about this or is this what you should expect of a $65 laser?

Is that hot glue all over the front of that laser??
yikes!
if so..try something else like a strap with nylon ties??

[Snilton]

Thats a big help, thanks!
Im definatly gonna ask for a replacement

Is that hot glue all over the front of that laser??
yikes!
if so..try something else like a strap with nylon ties??

Its a really cheap hot glue gun with low temperature so the glue peels right off.

[frank_1257]

My spot is not as good as the other member with this same laser but much better than yours i would ask to get an exchange ! Happy thanksgiving to you and your family if in USA !

Ive been browsing this forum for some time now and I just bought my first laser and i thought it was time to say hi.

I bought a 50mW green labstyle from aixiz.com.
The plan is to build a 20k scanner with it but for now I connected it up in an old lunchbox.

In this picture youll see Ive got a lot of scatter of the beam.
Attachment 4717
The up and down ones cant be seen by eye but the right and left can.

Is there anything I can do to prevent this or will it solve itself once i point it at the scanners?

[Snilton]

My spot is not as good as the other member with this same laser but much better than yours i would ask to get an exchange ! Happy thanksgiving to you and your family if in USA !

Its Sweden actually, so no turkey.
But thanks anyway!

[dar303]

En svensk till, trevligt! (another Swede, nice!)
I have two of these lasers, one does 97mW easy and the other one that I just got has a really bad mode hopping problem, I get two beams and around 30mW output!
I have emailed Aixiz a couple of days ago but so far gotten no reply.

/Daniel, Stockholm