Page 1 of 4 1234 LastLast
Results 1 to 10 of 35

Thread: Enclosures For Sale

  1. #1
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Arrow Enclosures For Sale

    George at Cham Tech has asked me to sell off his remaining inventory of laser enclosures. Currently I have 4 enclosures here, but there are another 10 available.

    These are made of steel and powder coated black. Rear panels have cut out for IEC, XLR, D conn, switch etc. They also have ventilation slots and a hanging bracket is included.

    There is an internal horizontal shelf neatly dividing the projector into 2 separate sections. Dimensions are as follows-

    Depth: 310mm
    Width: 245mm
    Height: 155mm

    Internal Height Upper section: 90mm
    Internal Height Lower Sectiom: 60mm

    Although an RGB system would be a squeeze, and RGY system shouldnt be a problem. I also guess you can get a 1+ watt DPSS in there without any difficulties. George will not be making any more of these cases, so once they have gone, that will be it.

    I apologise for the poor pictures, these were taken tonight using flash, the marks are merely dust. I will clean these up and take better pictures over the weekend in daylight.










    Cost of these enclosures is 75 each. Postage (DHL) is an additional 10
    If you buy 2, postage is still only a tenner.

    ONLY 1 LEFT

    EDIT: NEW PICTURES BELOW
    Last edited by QUAZAR; 12-16-2008 at 13:14.

  2. #2
    Join Date
    Mar 2008
    Location
    Preston, Lancashire UK
    Posts
    1,064

    Default

    Those cases look very familiar to me. I got two direct from George earlier this year along with my PM25. Great little cases.

    Carl

  3. #3
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    Sounds awsome. Is there db25 hole?

  4. #4
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    The D connector hole is for 15 pin version, for some reason George used this on all his controllers. It would be easy to file it bigger, or make an adaptor.

  5. #5
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    Any chance you could attach two side by side for an RGB?
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  6. #6
    Join Date
    Mar 2008
    Location
    Preston, Lancashire UK
    Posts
    1,064

    Default

    Quazar.

    I can tell you that you can only get a 9 way D type connector on the back of the cases as the port was originally intended for a serial port for the PM27 DMX projectors.

    Carl

  7. #7
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    Quote Originally Posted by allthatwhichis View Post
    Any chance you could attach two side by side for an RGB?
    Probably not. Although the front and rear panels are removable, so you may be able to bolt 2 of them end to end.

    I will investigate this on the weekend for you.

  8. #8
    Join Date
    Apr 2005
    Location
    SOUTHAMPTON U.K.
    Posts
    1,357

    Default

    Quote Originally Posted by Carl B View Post
    Quazar.

    I can tell you that you can only get a 9 way D type connector on the back of the cases as the port was originally intended for a serial port for the PM27 DMX projectors.

    Carl
    My mistake. Thanks for the update.

  9. #9
    Join Date
    May 2006
    Location
    Norway, Fauske
    Posts
    1,206

    Default

    well...I can allways make it bigger!

  10. #10
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    how much do these weigh?
    thanks
    Rich

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •