I'm guessing approx 3 kg each (tops).
I can weigh one when I get home.
I'm guessing approx 3 kg each (tops).
I can weigh one when I get home.
Thanks, that would be great. I'm trying to put another projector together which will do a lot of travelling so weight is my biggest issue.
Cheers
Rich
According to the bathroom scales, about 1.75 kg.
Thanks Quazar, I'm out of the country at the moment but back in 10 days or so. I'll measure all my stuff up and see if it will fit. I'll let you know if I need to order one. Hopefully I will!
Cheers
Rich
How many of these do you have left?
DL - Viper 75mW - Green (532nm)DL - 50mW Module - Green (532nm)DIY - 50mW - 12k Scanner - Green (532nm)
Okay, as it isnt raining this weekend, I managed to get some better pictures taken. I also need to point out that the front aperture on these cases is designed to allow a standard photographic AR filter to be fitted as the front window.
On this case (and a couple of the others) you may notice the applied graphics. These are merely self adhesive vinyl and are easily removed should you wish to do so.
no pics of brackets ? and how they are attached ?
PAUL
Ritchie
OK, my mistake. Here is a picture of the hanging bracket. Also a picture showing where it attached to the chassis. There are pre punched holes along the sides of the central equipment tray. The red stripe covers them on this particular case. These will take a 6mm bolt as standard. I would suggest having the bolt pointing "outwards" from the case, use a rubber washer between case and bracket, then use a flat washer and wing nut on the outside.
Just to update this thread. There is only 1 enclosure left. It has been fitted with a pair of externally mounted 60mm fans.
Lamborgini8 - yours is still safe.
DL - Viper 75mW - Green (532nm)DL - 50mW Module - Green (532nm)DIY - 50mW - 12k Scanner - Green (532nm)