Results 1 to 10 of 10

Thread: Red and Green mix

  1. #1
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default Red and Green mix

    Im planning on mixing 150mW (max) of green (532) with 450ish mW red(650)

    is that an ok mix (at max levels)
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  2. #2
    Join Date
    Jul 2008
    Location
    Rotterdam, Netherlands
    Posts
    789

    Default

    about 3 a 3.5 times the 532 power would be nice for a 650 laser.

    so you should be OK...

  3. #3
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    awesome.. im also adding about 180mw of 405 in the mix just for some flavor...
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  4. #4
    Join Date
    Jul 2008
    Location
    Rotterdam, Netherlands
    Posts
    789

    Default

    thats a litlle flavour...

    I have tried to balance 35mw (532) 200mw(658) with 130mw (405)
    the beam still come's out yellowish.....

    i think you need aprox 6 times the 532 power to "blance" out the 405.

  5. #5
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    eh.. im not looking for white.. just more colors.... ill do 473 eventualy
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  6. #6
    Join Date
    Jul 2008
    Location
    Rotterdam, Netherlands
    Posts
    789

    Default

    Quote Originally Posted by keeperx View Post
    eh.. im not looking for white.. just more colors.... ill do 473 eventualy
    i know......

    just sharing
    sorry

  7. #7
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    Quote Originally Posted by Anthony View Post
    i know......

    just sharing
    sorry
    dont be sorry, your info is useful..
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  8. #8
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    I could be way off here... but I had seen a link at some point to some calculator that calculates the needed powers for white... anyone remember the link?

    Thanx;
    DDL

  9. #9
    Join Date
    Jul 2007
    Location
    Knoxville, TN & Huntsville, AL, USA
    Posts
    3,137

    Default

    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  10. #10
    Join Date
    Jan 2006
    Location
    Akron, Ohio USA
    Posts
    1,754

    Default

    Also, remember that if the 405 BluRay hits a target that is fluorescent blue, you can forget all about the fact that is it really near UV. You'll get tons of blue to make white.

    The only place the measured 405nm output power really matters is in the beams in the air.

    James.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •