Im planning on mixing 150mW (max) of green (532) with 450ish mW red(650)
is that an ok mix (at max levels)
Im planning on mixing 150mW (max) of green (532) with 450ish mW red(650)
is that an ok mix (at max levels)
Quis custodiet ipsos custodies?
Solid State Builders Group
about 3 a 3.5 times the 532 power would be nice for a 650 laser.
so you should be OK...
awesome.. im also adding about 180mw of 405 in the mix just for some flavor...
Quis custodiet ipsos custodies?
Solid State Builders Group
thats a litlle flavour...
I have tried to balance 35mw (532) 200mw(658) with 130mw (405)
the beam still come's out yellowish.....
i think you need aprox 6 times the 532 power to "blance" out the 405.
eh.. im not looking for white.. just more colors.... ill do 473 eventualy
Quis custodiet ipsos custodies?
Solid State Builders Group
Quis custodiet ipsos custodies?
Solid State Builders Group
I could be way off here... but I had seen a link at some point to some calculator that calculates the needed powers for white... anyone remember the link?
Thanx;
DDL
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....
Also, remember that if the 405 BluRay hits a target that is fluorescent blue, you can forget all about the fact that is it really near UV. You'll get tons of blue to make white.
The only place the measured 405nm output power really matters is in the beams in the air.
James.