Hi.

I ordered one of these modules to mke use of the heatsink and the driver.
The driver is TTL though so i am not sure or better i am not going to use this in my projektor.

The Module is advertised with "line generating" output which is different to what i received.

When i opened the package yesterday there was a New Wish module in there putting out a nice red dot but the lens quality isn't as good as it should be.

The heatsink becomes very handy if you are using aixiz modules as they fit just perfect in there. The build quality of the heatsink is perfect. Two little
holes on the bottom side are pre-drilled so you can use them to mount the heatsink in your projector and hold the module in place at the same time. No glue is neccesary.
The colour of the heatsink is black which is again not as advertised on their website.

I used a screwdriver and a hammer to remove the new wish module which was very easy to do as it was only glued on at one little spot.
No damage has been done to the red module neither to the heatsink.

After all you will get a nice heatsink + a 70mw red module + ttl driver with adjustable pots.

Here is the link http://www.dealextreme.com/details.dx/sku.9865

-greetz Poco