Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Argon Marlin PSU Tips

  1. #1
    Join Date
    Jan 2009
    Posts
    8

    Default Argon Marlin PSU Tips

    Hello all,

    Would anyone happen to have any tips, hints, or info on these PSUs. I have dug through the sams pages quite a bit. My PSU has a marlin sticker on it. From what I can tell my, the marlin, PSU is somewhat different than the standard omnichrome 150. It has MJ2500 and 2N6678 transistors.

    Why you ask? Welllll, I kinda drove a 1/4-20 mounting bolt into the anode. Now it just winks a bright blue blip at me but wont sustain. From what I have read these are not the friendliest things to work on due to close quarters. Further compound that with a thick layer of, I'm guessing, baked on xerox toner.

    If anyone might have a tip on what goes south when you short the anode please shed some photons. Or if anyone has any documentation or schematics that they can share that would be great.

    Thanks in advance
    Take care

  2. #2
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    take me a few pictures of the marlin so I can tell which one you have please.
    I wrote the FAQ chapter

    Steve Roberts

  3. #3
    Join Date
    Jan 2009
    Posts
    8

    Default Argon Pics

    Thanks Steve,

    Let me know if you need a different angle. It has worked great for 6+ years of minimal usage. Unlike the supplies at laserfaq the regulators in pic #3 are +/-12Volts instead of 15.








  4. #4
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    That is a ALC gold box, older style. Its a rebuild by Marlin. Marlin is/was just a contract manufacturing house for circuit boards. Dont worry, its not the 9 amp limited fet one. Thats a rebuilt omnichrome tube in a ALC head.

    The schematic is a 3x4 foot sheet of paper,

    I'll find out what Kinkos wants to copy it.

    The ignitor board in the head is a wierd newer generation thing.

    Pm me with a address and I'll get back to you.

    Steve

  5. #5
    Join Date
    Jan 2009
    Posts
    8

    Default PM Sent

    Hello Steve,

    PM Sent.

    Let me know if the info provided is good or if there is any thing else you need from me. My wife was glad to hear I might be able to get it off of her dining room table. I have run out of room in my 2 car garage that is actually 100% tinker shop and 0% garage. Now my projects are spilling over into the rest of the house.

    Take care
    Ray

  6. #6
    Join Date
    Jan 2009
    Posts
    8

    Default

    Hello Steve,

    Are you still out there? Were you ever able to dig up the schematics and get them to a 'send friendly' format? Let me know the cost for your troubles. Will be happy to compensate. Hope to hear from you soon.

    Regards
    Ray

  7. #7
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Quote Originally Posted by Blarg_On View Post
    Hello Steve,

    Are you still out there? Were you ever able to dig up the schematics and get them to a 'send friendly' format? Let me know the cost for your troubles. Will be happy to compensate. Hope to hear from you soon.

    Regards
    Ray

    I need to go to kinkos for sugeek anyways. there are 2 boards in a classic gold box, a driver card (always the same) and a main control card. Could you shoot a pic of the main control card so I can see which chipset you have ? Its always the outside card and has the most chips by a long shot. There are three or four of them. Some I already have as PDF, others are on 3x4 sheets of paper.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  8. #8
    Join Date
    Jan 2009
    Posts
    8

    Default

    The other board that I have in there that is not pictured really only has a few big/long silver caps and a 6n137 which I think is probably some type of opto coupler. Is this the board? The only other is the 3rd picture. It has the regulators and other assorted chips on it. It is different from others I have read about in that it has 12 volt regulators as opposed to 15 volt. If pic 3 is the right board let me know which area to zero in on and I can get a closer clearer pic.

    Thanks alot
    Ray

  9. #9
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    OK, you have square opamps, I'll dig that one up tonight.
    Last edited by mixedgas; 05-09-2009 at 14:45.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  10. #10
    Join Date
    Jan 2009
    Posts
    8

    Default

    Yea, I was taking another close up pic. If the TL494 is the main indicator, then that is what I got. Here is a pic of the regulators and the TL494. Thanks again Steve for all the help.

    Regards
    Ray


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •