nice build.. keep us updated on the price..
I built one of these so i know how much it cost![]()
nice build.. keep us updated on the price..
I built one of these so i know how much it cost![]()
Quis custodiet ipsos custodies?
Solid State Builders Group
Hiya Phil,
Thank you for comment.
I have a diode that I buy directly from a manufacturer that makes 200mW CW and 440mW pulse power. These have been tested by myself and several other members. They do not like to be pushed hard, but will last a very long time at 200mW.
Also, please note that this is information gathered through testing and the specs are provided by the manufacturer in China, and as such, I only report what I am told.
Unlike the striped diodes, these are excellent diodes with a really good beam spec. The resulting beam has a faint stripe across the beam, but that can be tamed and will not affect the output once it reflects off the scanners.
Thank you;
DDL
I gotta admit it Mo - you've got some fine work there. Especially now that Marconi seems to have dropped off the face of the earth, it's refreshing to see other people coming up with alternatives to the verenable Maxyz module.
And yeah, the real key is to get a 200-300 mw 635 unit with similar beam specs. Like I said, I know of 2 people that have done it, but thus far it's *not* cost effective. (Nor is it trivial to assemble. One solution had seven optical elements!)
Looking forward to seeing your dual red unit inside a full blown projector at FLEM in a few months. (Assuming this venue I found in Maitland pans out, that is!)
Adam
Nice!
Any pictures of your build? I'm interested in seeing how yours looks
I will keep everyone updated as these develop more and the pricing gets decided better.
--DDL
P.S. For those who may not know me, please rest assured that each module will come with a supplied power graph and a settings documentation. Each module will come with a 1 year warranty provided by myself!![]()
Yikes! 7? That must have some massive losses due to these optics!
FLEM you say? Maitland? I was asking around to try and find us a warehouse to use, unfortunately no one has anything available in Orlando...I will help as much as I can to get this going, please let me know.
Regards;
DDL
just realized, you mounted the optics wrong. there is NO adjustment for the laser that goes thru the cube.
please see here
http://photonlexicon.com/forums/showthread.php?t=5949
Quis custodiet ipsos custodies?
Solid State Builders Group
think about the MM1s and what they provide.
trust me we tried it both ways. the way he has it allows for adjusting only 1 beam. the other just goes straight thru.
Quis custodiet ipsos custodies?
Solid State Builders Group
My dual red set up has no adjustment for the laser going through the cube. Only the bent beam is adjustable. I just set my scanners to the height of the through beam and adjust all the rest for near field alignment and it is all good.![]()