Really unpleasant trade with Lasernerd

[dar303]

and IF they happen to land any other way, they are much cheaper than puppies!

[soforene]

As may be expected, I have an animated gif that fits that scenario perfectly.

But I fear a good old clue-by-fouring if I were to post it.

Use your imagination folks .....

[Lasernerd]

I will ship out to his P.O. Wednesday!
nice 12K$ option!
tracking will be provided,I will insure for 7K$.

I have both e-mailed and PM'd Junktronix with NO reply from either,

So this going to where I shipped the AOM

Alltogether now I will have aprox. 500$ in shipping !
Kevin you got one heck of a deal here!

[300EVIL]

DOUBLE SECRET BEST FRIENDS!

http://www.youtube.com/watch?v=YbN_MAUbLPM

I was totally thinking that while posting.... Didn't think anyone would get it.
Thanks!
Adam

[Lasernerd]

I am starting to get concerned about this lightwave 210
it has a second beam shooting out at about 30 deg.
@ 2 watts CW main beam, the 2nd beam is 24mw's.
I could measure at lower or higher current it is linear

Is this laser head shot?

[Junktronix]

As I explained to you in email already, the optical path in that head is quite complex and stray reflections, especially ones that are on the order of 1% of the primary beam are not unusual. Block the stray reflection with an aperture if it bothers you.

I am starting to get concerned about this lightwave 210
it has a second beam shooting out at about 30 deg.
@ 2 watts CW main beam, the 2nd beam is 24mw's.
I could measure at lower or higher current it is linear

Is this laser head shot?

[Lasernerd]

As I explained to you in email already, the optical path in that head is quite complex and stray reflections, especially ones that are on the order of 1% of the primary beam are not unusual. Block the stray reflection with an aperture if it bothers you.

Umm ok,thanks
Yes you did,but this stray beam seems to be getting worse,It was barely visible when I alerted you to this,now with about an hour of operation the intensity has increased
I would think it would have only one beam.20K$ laser
no other laser that I have owned has done this,(3)Coherent DPSS's Not the compass's
Even my old Mr.coffee had one beam.

I just hope a optic is not failing

[Lasernerd]

I will ship out to his P.O. Wednesday!
nice 12K$ option!
tracking will be provided,I will insure for 7K$.

I have both e-mailed and PM'd Junktronix with NO reply from either,

So this going to where I shipped the AOM

Alltogether now I will have aprox. 500$ in shipping !
Kevin you got one heck of a deal here!

Here ya go Kevin!
USPS # 7008 1300 0001 3863 6213 confirmation of delivery
Certified,Insured and all!! 46lbs.
Kevin,Let us know when that big box arrives

[Lasernerd]

Kevin,It is at your PO for pick up!

[Junktronix]

Kevin,It is at your PO for pick up!

It's here. The back panel got dented in but probably not enough to keep it from working. However, you forgot to sent the cables that connect the controller to the table. It's useless without the cables.