Page 10 of 11 FirstFirst ... 67891011 LastLast
Results 91 to 100 of 108

Thread: Lumia Extravaganza

  1. #91
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Cool- thanks!
    While I'm at it, what did you use for your turntables? They look perfect- nice for swapping out different objects. Experimenting with different glass seems to be half the fun, so I am a big proponent of making the mounts able to allow swapping glass on a whim.
    -Mike


  2. #92
    Join Date
    Aug 2007
    Location
    Portland
    Posts
    1,355

    Default

    Note: I was at Home Depot today doing one of my go-to-Home-Depot-and-walk-around-aimlessly-things when I happened upon glass doorknobs (replicas of the old ones) for ~$7/pair.

    Just an FYI. They also had single acrylic "diamond-cut" doorknobs for about the same price.

    I almost bought a few of them and then I realized that they would just sit here for a while so I figure I'll buy some later when I make something along the lines of a lumia-table.

    -Jonathan

  3. #93
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default

    Quote Originally Posted by mikkojay View Post
    Cool- thanks!
    While I'm at it, what did you use for your turntables? They look perfect- nice for swapping out different objects. Experimenting with different glass seems to be half the fun, so I am a big proponent of making the mounts able to allow swapping glass on a whim.
    -Mike
    They are little "Lazy Susan's". - Tim

  4. #94
    Join Date
    Aug 2007
    Location
    Portland
    Posts
    1,355

    Default

    Here's a really low-res video preview of what I put together last night at a friend's birthday party. I hit a glass plate but used a diffraction grating first. Warning: 100% MacGyvered.

    Two videos from my phone:
    Video ONE
    Video TWO


    I'll try to track down the other videos and pics that people took.

    -Jonathan

  5. #95
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Cool- definitely post more pics and vids when you get'em!
    I hope to be able to get to the point where I can generate some video soon as well. I have been bouncing back and forth between my projects lately, I need to just pick one and hit it hard instead of trying to just do a little of everything at once.
    I did find a nice little turn table on ebay for 5 bucks, but the motor spins just a little fast for my liking. I have a bunch of parts to try spread out all over the place, hopefully pretty soon-
    -Mike


  6. #96
    Join Date
    Aug 2007
    Location
    Portland
    Posts
    1,355

    Default

    I got sick of waiting for pics/vid from the other night so I fired it up in my spare room for an example. I think I'm going to have a hold cut in the middle of the plate and find some beefy, slow motor to rotate it. As you can see, slow movement works well:

    http://www.youtube.com/watch?v=B2L7-R_dzNw

    Don't worry, I had some goggles on.

    -Jonathan

  7. #97
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default Its Not Dead

    Just to show that I have not let this project slip into oblivion, I took a few pics of what I worked on this weekend. I had been putting this part on hold since I knew it was going to be a PITA (without a sheet metal shop). I finally made a back-panel for this box. I formed it out of some 22ga hardware store sheet metal using 2 long pieces of angle iron in a vise. Not real pretty up close, but it ended up fitting like a glove.
    I gave it a little extra lip on the top so I would have a spot to park some of the laser heat sinks. I have this thing set up for three interchangeable wheels that will spin at approximately .5 to .25 RPM. I started out with the idea of having a green and a red, combined with a dichro, then use actuators to switch the beams to different effects. That ended up being a hassle, so I decided to just stuff this thing full of as many burner diodes as I could get my hands on I will just use modulation to turn different effects on and off. At last count, it is going to have:
    1 532nm 100mw analog
    2 405nm 100mw analog
    2 660nm 100mw analog
    2 660nm 200mw analog

    There is still plenty of space to the left of the three wheels, so I am thinking about either a turntable, or some diffraction gratings. I also want to squeeze in a spot for some of that wave tube I got from Steve- that stuff is cool so it would be a shame not to get it in there somewhere.

    I used a chop saw to cut in half 2 of those z-bolt heat sinks in order to end up with 4 small ones instead of 2 big ones (sort of a buy one get one free effect) The diodes and power I am going to run should not generate a bunch of heat, so I think this will do OK. It will also save me some space since things are going to start getting cramped in there soon.

    One last thing I did this weekend was assemble my MIDI decoder kit. This kit takes in MIDI data and converts it to the equivalent of 4 10k ohm pots and 8 TTL outputs. Since there are only 4 pot outputs, I will probably use the TTL to toggle between the different diodes- this would mean that only 4 effects could be run at any one time, but that will be plenty I'm sure. I plan on using a MIDI keyboard as a signal source. I am absolutely new to MIDI, so this should be an interesting experiment.

    Now I just need to wait for that keyboard to show up in the mail.............

    Later, Mike
    Attached Images Attached Images


  8. #98
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Looking good!

    Should have some killer lumia effects when it's done - looking forward to checking it out!!
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  9. #99
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Hey thanks for the "energy"!

    I put together a little turntable drive to be able to shine light through experimental objects. I used a disco ball motor with a small rubber belt to drive the table. The table was originally driven by a geared motor from the inside, but I wanted slower rotation speed and a decrease in height. I used the Dremel to carve a groove thru the plastic teeth for the belt to ride upon / act like a pulley.

    Straight up from the motor shaft is a rubber grommet that will be used to hold and rotate Steve's wave lumia tubes. It is difficult to capture a pic or a video no less of how cool the effects from these are. I might bust out the torch and play around a little bit now that I get the idea (thanks Steve!). The nice thing here is that I will be able to drive 2 effects, at different speeds, from the same motor. This motor is also 120vac so it does not require a transformer.

    Here is a quick video that will give you the idea of the new turntable orientation.

    On another note, A little over a week ago, I bought an Axiom 49 MIDI keyboard that I hoped to use, in part, to drive my new MIDI decoder board. I should have said "paid for" instead of "bought" because I think that whole listing was fraudulent. Luckily I used Paypal, and since the seller was a "new" seller and unregistered, Paypal didn't release the funds right away. Since I made a case of it early enough, the funds are now frozen pending the outcome of my case- which will of course be, "shit yeah this is fraud". Anyway, to lick my wounds I just "paid for" a Novation Remote 25 SL for $190. Hopefully that will turn out to be a better deal.

    All for the moment-
    Mike


  10. #100
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    I finally got the midi decoder working tonight- here is a quickie sample with just 3 of the lasers/effects:
    YouTube Vid
    I cannot wait to mix in some blu ray, but I am fed up with frying them at the moment. Homie needs a Lasorb or two bigtime! If anyone could point me towards the quickest way to procure a couple of these I would be forever grateful!
    -Mike


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •