ok i have a dichro (pass green reflect red) from onestop and it sux..
the waste beam is super bright, so im assuming that im wasting alot of green
i also need an IR filter for the green..
suggestions??
ok i have a dichro (pass green reflect red) from onestop and it sux..
the waste beam is super bright, so im assuming that im wasting alot of green
i also need an IR filter for the green..
suggestions??
Quis custodiet ipsos custodies?
Solid State Builders Group
I use a laserwave dichro..
Good dichro.. but also has a 3% wastebeam.
Try a different angle. I have found 45 degrees is not the best angle on my dichros. Check out this post for a small experiment I did with dichro angles. It may not be the dichros you have suck, just that they are not performing best at the angle you have the lasers at.![]()
Love, peace, and grease,
allthat... aka: aaron@pangolin
try one of my LW's. in all honesty, everyone seems pretty happy with them. ill meter one and take pics when i get home tonight.
-Marc
ILDA- U.S. Laser Regulatory Committee
Authorized Dealer for:
- Pangolin Laser Software and Hardware
- KVANT Laser Modules & Laser Systems
- X-Laser USA
- CNI Lasers
- Cambridge Technology & Eye Magic Professional Scanning Systems
FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems
Hey keeper...
Yeah, and to add to this 'fine suggestion''try a different angle', too, as-in: think 'POLARIZATION'...
keep it at 45˚ (or whatever you find seems to work a bit better, per Aaron's suggestion...) but ROTATE it slowly through-to 90˚ on the vertical-axis, and see what happens... (...and watch your eyes!
)
Certainly, not sure of your set-up, but might be something to check...
ciao
j
....and armed only with his trusty 21 Zorgawatt KTiOPO4...
Five comments,
Uno:
Backside AR coats on the dichros, A La One Stop Laser Shop style.
No offense to Bridge if he hasnt done it yet, but soon he will.
You get a 4% reflection off plain glass.
Dos:
Play with the angle
Tres:
your eyes are lousy power meters, 300 micrwatts some times looks like 300 mW in the dark.
Quatro: play with the polarization, as others have said.
Cinqo: Some dicros are just coated for the wrong wavelenths ( hint, big place, starts with E)
I will be glad to run the dichro on my basement spectrophotometer if you have doubts.
Oh, and are you sure your on the coated face...... That happened to me at Selem, I assumed a dichro was installed in the right direction. Never Assume unless your name is Jesus.
Steve
well there is an obvious bluish side and a more yellowy side.. i am sending the green thru the bluish side
Quis custodiet ipsos custodies?
Solid State Builders Group