help with mamba black 1.95!!! please

[greeklaserist]

Hello i just got my mamba black software 1.95 and i have medialas usb box version 2.0 which it recognises but no led flash when i press the play button or laser output. i read on the manual something about logical and physical projectors which quite frankly i did not get at all can somebody help me out with this guyzzz? please if anyone knows how to help let me know thank you so much !!!

[stanwax]

If you only have one Dac it should be set as default automatically in the projector mapping but to check go to the show timeline and right click where it should have the word 'default' with a tickbox next to it on the left side. You will then be able to select 'change track and projector mapping'.
This will open up the mapping window and in there you should see your USB dac listed - if its not there then Mamba isnt talking to it but if that was the case you should have seen a message on startup saying 'no output device detected'. If its in there make sure you select it as default. then close the window and try playing the show again.
There is at least one of the shows that comes with mamba that does not map to the default device meaning that you have to go in and set it yourself - I assume you are trying to play some supplied content just to see whats going on.
If you are not doing this try it....or open mamba click on the elipse tool and draw an elipse in the frame edit window. What you create here will show in the timeline as a single scene with the content of that frame in it. If you now hit play it should output this elipse to the DAC.

Hope it helps

Rob

[greeklaserist]

thank you so much for that info i will try your advice but i am sure that mamba detects the medialas usb box and i can see it in the mapping settings as well .... will let you know ....
thank you again

[greeklaserist]

thank you everything works very smooth now had to format my laptop and reinstall evryting clean and fresh and now it works fine thank you so much for your help