Results 1 to 2 of 2

Thread: Math Related Help With Layout

  1. #1
    Join Date
    Dec 2007
    Location
    England, Hertfordshire
    Posts
    333

    Default Math Related Help With Layout

    Ok, I have goten all the parts for my green 10k scanner together and mounted on the metal plate, I just bought the enclosure and have hit a somewhat big problem.

    Attached is the layout I have the scanner which is to scale and on the back of the canner I want to have a IEC connector which has a switch and fuse (size is 47x27.5mm and 29mm deep), a DMX In connector which I am not too sure on the dimensions, DMX dip switches and pot for sound sensitivity (12mm).

    The problem I have is how to fit all that onto an enclosure which is only 89mm high (minus 10.2mm for the aluminium plate) and 279mm wide while keeping it looking reasonably good and not having the main power cables crushed up againsed other components.

    There is a gap of about 70mm above the Display Dsp board next to the amp but I am not totally sure what I can get above that.

    I do want to get a fan on there as well but I guess that can be moved to the front. The way I layed it out was so that all components fit onto the bottom half of a U shape enclosure so that the lid can easily be removed if it needs to.
    DL - Viper 75mW - Green (532nm)
    DL - 50mW Module - Green (532nm)
    DIY - 50mW - 12k Scanner - Green (532nm)

  2. #2
    Join Date
    Dec 2007
    Location
    England, Hertfordshire
    Posts
    333

    Default

    Note the laser head has been moved forward to the end of the Laser PSU.
    Attached Thumbnails Attached Thumbnails laser-layout2.jpg  

    DL - Viper 75mW - Green (532nm)
    DL - 50mW Module - Green (532nm)
    DIY - 50mW - 12k Scanner - Green (532nm)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •