Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26

Thread: New Laser today from Laserwave. need help

  1. #11
    Join Date
    Jan 2009
    Location
    Norway, Mo i Rana
    Posts
    127

  2. #12
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Cool, well that should work just fine, who made the DAC you're using? Is there a website for it?

    Gotta admit, you had me worried, I tested each breakout board for problems before I ship them, but after reading the first post, I ran over and tested a breakout board to make sure I had the pinouts corrects!

  3. #13
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    I see an "output setting" option and a track and projector mapping option. Anything under either of them?

  4. #14
    Join Date
    Jan 2009
    Location
    Norway, Mo i Rana
    Posts
    127

  5. #15
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Hmm, I don't see anything in there that jumps out as being a problem. How about this, with the breakout board removed from the DAC, if you try to display a red circle you get output on pins 6 and 7 instead of pin 5?

  6. #16
    Join Date
    Jan 2009
    Location
    Norway, Mo i Rana
    Posts
    127

    Default

    Quote Originally Posted by DZ View Post
    Hmm, I don't see anything in there that jumps out as being a problem. How about this, with the breakout board removed from the DAC, if you try to display a red circle you get output on pins 6 and 7 instead of pin 5?
    I get output on all colors Red Green and Blue if i display a red circle

  7. #17
    Join Date
    Jan 2009
    Location
    Norway, Mo i Rana
    Posts
    127

  8. #18
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Wow, that's interesting. Ok, there has to be a palette setting somewhere in Mamba. Right now it's just outputting to all lines instead of the individual RGB lines. I know it Panoglin you can do this as well and it's easy to change. I'm not familiar enough with Mamba to know how to do it. I found the user manual on the medialas website, I'll take a look and see if I can find anything.

  9. #19
    Join Date
    Jan 2009
    Location
    Norway, Mo i Rana
    Posts
    127

    Default

    and if i use a fade in or fade out effect in a Blue circle the green is also fading out and in. would think it was connected on the same output what is wrong

  10. #20
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Well I downloaded and installed the demo of mamba black, there really isn't much there to configure. Are there any settings on the USB box?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •