Results 1 to 9 of 9

Thread: LaserWave controller mounting

  1. #1
    Join Date
    Nov 2007
    Location
    Sydney, Australia
    Posts
    603

    Default LaserWave controller mounting

    In light of a couple of recent posts on mounting a Laserwave Laser controller.

    I thought I’d share the method I used for mounting the laser controllers (or three of them)

    It’s simple a strip of Aluminium with holes drilled in either end that slots into the outer slot of the heatsink fin on the controller.










    One bracket three power supplies
    The added bonus of this is that it clamps the heatsink to the base plate to aid cooling; also the power supply can be removed in a very short time by simple loosening two screws and swapped out.



    To mount the power supply this way you may need to trim the glue and the two switches to allow it to mount flush (without damaging the switches)


    Troy
    RTI Piko RGB 4 Projector
    CT6215 Scanners & CT 671 Amps; CT6210 & Medialas Microamps.
    RGBLaser Systems 6000mW RGB Module - 638nm/445nm/532
    LD2000 Pro + QM2000.net + Beyond
    Etherdream + LSX

    Old Projector Build


  2. #2
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,438

    Default

    I would be interested to know the possibilities to remove the fan and sink and use the baseplate as a heatsink to cool the laserwave drivers.
    When I finally will build a rgb unit, I will probably go this way.
    Because it saves space and moving parts.
    As the saying goes: "never use forced cooling unless you are really forced to"

  3. #3
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default

    Quote Originally Posted by -bart- View Post
    I would be interested to know the possibilities to remove the fan and sink and use the baseplate as a heatsink
    Check with Bridge re. warranty.. but I did this to a couple of LW's with no problems. Unplug the head from the driver and check the TO's are electrically isolated properly before plugging it back in.
    Attached Images Attached Images

  4. #4
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,438

    Default

    @ p1t8ull;

    Looks good, do you have some more pictures of your projector, it seems very compact. Where did you get the housing from ?

  5. #5
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default

    Thanks Bart, they are very portable

    A few years ago I bought a surplus dealers stock up of dummy load heatsinks and one day blew off the dust and squished in some LW modules and DT40's --
    Attached Images Attached Images

  6. #6
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    hey troy-

    excellent job with the customization. NOT to detract from your skills or anything and i am simply only suggesting this for people who may not feel comforthable taking apart their power supplies or anything, but rob (stanwax) just made up SUPERB mounts. some of you who may be in the stage of mounting their supplies may want to contact him.

    if not, the way troy (loopee) suggests here is perfectly fine also.
    -Marc.
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  7. #7
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    I just tap some holes into the thicker part of the heatsink.. Easy peasy, and it cost me nothing
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  8. #8
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    thanks for all of you good working, good idea , gentleman!
    Best regards!
    Bridge
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  9. #9
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    I thought I would take some pics this afternoon. I personally prefer mounting the supply on its side as Troy does, as it takes up way less space.

    Anyway, tape the supply up to keep any stray bits of aluminum swarf out. Then drill and tap.

    Personally I think it would be great if you can have this done in the factory when all the other holes are getting drilled and tapped Bridge.
    Attached Images Attached Images
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •