Page 2 of 2 FirstFirst 12
Results 11 to 20 of 20

Thread: RGB Amp Carcass Projector Build

  1. #11
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Hey DZ- Dude! those DT40s ROCK! Great tuning too- they are truly plug and play!
    I did my first dry run tonight, and WOW!
    It was one of those- man, this thing ain't together enough, but I can't wait to see it run... Although as I mentioned in another thread my blue is back in its homeland for a tuneup (Dave at LSP is awesome), the RGY results are looking very encouraging!
    Here is what I still have on the To Do list, besides take more pics:
    1) Cut square opening hole in front panel
    2) Install lock switch
    3) Mount Ledex shutter & decide if I want to do SSR or drive circuit, determine a power supply too- I don't want it to cook while holding open. I have a few SSR's already, so that might make that decision easy..
    4) Adjust speed on the FlexMod2 controlling the green- the MaxYz is way fast
    5) Pretty up, paint, and find warning label for front panel- Hey DZ, where did you find yours? I would like one like 2x3 or so
    6) Mount emission indicator in front panel

    I ended up using 4 threaded knobs to secure the back panel. They worked out pretty slick- I'll take some more pics this weekend.

    -Mike


  2. #12
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Very good, glad they are working well! Regarding the label, I'll have to look around, I think I have a photoshop file that I can send you. You'll just need to edit the label and print it out. For the one on my projector, I printed it out on label paper at Kinko's.

  3. #13
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Hey DZ,
    That is a great idea- I hadn't thought of that approach, but I bet it will work very well. I also have a Kinko's near by, so that is a plus.
    Thanks, Mike


  4. #14
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default Its Alive!

    This has been quite a ride! Lots of highs and lows on this one-
    Here is the recap:
    My out of warranty 100mw blue fizzled during the build, but Dave from LaserShowParts.com stepped in and hooked me up big time. For a minuscule fee, the blue was to be repaired by CNI. Rather than repair, they ended up sending me a brand-new replacement that cranks out approximately 200mw! I cannot thank Dave & Marcus enough- LaserShowParts really kicks ass!

    Seeing that I now had a bunch of blue to contend with, out went the MaxYz and in went a new dual red lpc-815. I cobbled it together using 2 housings from the ebay chinalasershop 100mw red modules. The heat sinks on these lended themselves perfectly to creating a dual red with their flat underside and small size. Since I am driving them with a FlexMod2, I was able to reuse the analog drivers for something else. They could be tuned down to 145ma, so they ended up making great phr803t drivers for my Lumia box. I bought 2 of these on ebay for $108 shipped, and they showed up in about 1 week from overseas which I thought was impressive.

    I literally fired this thing up as the new RGB for the first time just about an hour ago, so please bear in mind that I have yet to do a little more color tweaking, etc...

    Here is a video walkaround

    Some pics:
    Attached Images Attached Images
    Last edited by mikkojay; 04-10-2009 at 12:56. Reason: Extra well deserved props for Dave


  5. #15
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up

    VERY NICE!!! Still looks like you might have too much blue... time for some videos and beam shots!!!

  6. #16
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,119

    Default

    [QUOTE=DZ;85575]Someone makes a fastener called a DZUS?!

    yes, they do 1/4 turn locking, wonderful things.

    I imagine you've already placed the order.

    Steve

  7. #17
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Quote Originally Posted by allthatwhichis View Post
    Still looks like you might have too much blue...
    What a great "problem" to have, eh?
    When I was doing the initial alignment and eyeballing I actually turned the gain on the green down a little, so it looks like it is time to pump that one back up. Man, I have been without a functional projector for so long now, I might just have to play a little while.
    This is going to be the graphics box, and I have most of the new components, including some Mean Green from LSP & LaserWave that will be destined for the new "Beam Box". I might need to catch my breath before starting that one- and clean my basement. It is SUCH a mess!
    -Mike


  8. #18
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Wow man, you work quick!

    Too much blue? No way! Never!
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  9. #19
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    There is a slight blue tinge to the white but whether or not thats a problem is personal and also depends on the performance of the beams.

    Looks a very good white to me otherwise.

    Hope you don't mind but I ran it through Tocket's excellent Chroma utility - 2 reasons, one it confirms your balance, 2 it confirms the accuracy of the ultility. This was the result:





    To me if you did want to adjust it, it looks like you need more red to reduce the blue tint. Reducing blue shifts the white point upwards whereas red shifts it right. 600mw 660nm gives you perfect balance according to chroma.

    This is it with .6w 660nm:



    I didn't do it but a fraction more green would shift it upwards, dead centre.

    I also have to say those DT's are kicking ass. Is that factory tuning because thats one of the most perfect ILDA patterns I've ever seen posted on here.

    (I hope Haymaker's seen this thread. If ever there was a reason to buy DT's or Scanpros over unknown Chinese scanners this has to be it!)
    Last edited by White-Light; 04-13-2009 at 02:41.

  10. #20
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Hey Guys,
    I spent last night tweaking the green up a little, and got the white even whiter and brighter. I also found that I needed to adjust the zero bias on the green up a little closer to its threshold. Having done that, it is looking much better.

    I spent a good chunk of (way too late) last night "rediscovering" scans that used to be hum-drum but now really pop. Maybe I am just still riding the new scanner high- could be! Yeah, the DT40 pro's kick some ass for sure.

    Thanks for posting the chroma scan images- that is a really cool utility. I have been meaning to download it and check it out.

    & Thanks everyone for the encouragement- I watched the "One More Time" show last night like 3 times in a row, just glued to those "breathing" abstracts in the middle- do you know the ones I mean? I have GOT to figure out how to make me some of those! I'll take some more vids soon.

    -Mike


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •