-
8X blu ray sleds!?
BDR-203BK 8x BluRay Laser Diode SLED
http://www.lasersurplusparts.com/ind...products_id=66
Coming soon apparently? Anyone else heard of these?
Got any idea what they may output/cost?
-
Ohhh... Shiny... I would guess a lot, for both cost and output.
-
These 8X Blu-Ray Diodes are supposed to blow the 6X out of the water by their
higher power output capabilities.... here is a article...
"From Optics.Org
May 11, 2007
Nichia announces blue laser plans
Mass production of 250 mW blue-violet sources will begin in January 2008, with 320 mW on the way.
Nichia announced its plans to produce blue-violet laser sources for next-generation DVD drives at Laser Expo 2007, held in Yokohama, Japan, at the end of April. A 180 mW pulsed-mode model will start shipping in June 2007, to be followed by a 250 mW model in January 2008.
The sources will enable data to be recorded onto DVD disks at much faster speeds. Nichia states that 4x-6x recording speed is possible onto a dual-layer disk using a 200 mW blue-violet source, while 8x speed is possible with 240 mW sources.
Nichia also plans to mass produce a 320 mW model in the first half of 2008, which the company claims will allow 10x recording speed. The estimated lifetime of the device is more than 10,000 hours."
Someone (daguin) on LPF bought a complete 8X DVD burner and is in the process of
taking it apart and testing all the LDs found in it... but I think the Blu-Ray is first...
Jerry
Last edited by lasersbee; 03-08-2009 at 18:04.
-
I bought a Buffalo BR-816FBS 8x BluRay Burner on January the 5th and extracted the LD's.
IR and Red was combined in one flat LD that didn't fit to any colimator.
The 405nm LD fits perfectly to the 405 - 445nm colimator.
The colimator is mounted in a aluminum heatsink and is placed in my second RGB projector.
The maximum current of the analog driver is set to 200 mA.I heard that 405nm isn't very good visible,
but i'm positively surprised about the output of this 8x LD.
I don't have a laserpower meter.My first RGB should have 150mW 532nm , 400mW 658nm and 100mW 473nm.
For the second RGB i bought a used 300mW Green only Projector and added a 400mw 642nm Swisslas modul.
The Case of the second projector is small ,i don't have space for a Blue DPSS,so a 500mW 445nm was planed.
Since i don't await a good business year and also noticed that the power diffrence between my two projectors is to big
to run them mirrored together,i was glad for a much cheaper stopgap solution.So i reduced the output of
green and red to the same optical level as the first RGB has.Of course the 100 mW 473 are also a bit low
but now it fits very good with the 8x bluray from the second projector,which also have the better dichros.
If the 8x sleds are obtainable for a good price ,maybe i raise to 250mA.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules