5" x 10" x a bit over 3" tall, but with 80lb of power supply attached by a 20' umbilical. Spec for the beam is actually 2.3mm and <0.5mrad. A while ago I was messing with one of these, sending the beam out the door and using a bathroom mirror to bounce it into the sky (don't try this at home kids). Funny thing was the beam quality looked really bad. Turns out it was burning holes in the cheap second surface mirror coating!
Sadly, this is on consignment so I don't get to play with it forever. I wish I had an excuse to throw a spare set of 6800's in front of it and show off a bit.



Reply With Quote
If you do decide to do this make sure your mirrors can handle it!
.
