RGB 2W

[MechEng3]

Any specs on the optics you have chosen? Seems achromats would yield better performance......nice to see someone else in the works of this.

[djolek]

I don't have a pecification about it.
I used optics of an old objective of my friend Shrad and then I made tests with the 3 lenses that there was above. I took those which gave me the best relation between the diameter and the divergence. Then measurement between the lenses and think bout the support of adjustment.

[djolek]

I received the telscope yesterday.
I hope than repair the red and try it this week-end

The first lens is bi concave and the second is biconvexe.

[p1t8ull]

I received the telscope yesterday.
I hope than repair the red and try it this week-end

The first lens is bi concave and the second is biconvexe.

When playing around doing this I found DCX lenses distorted the beam a fair bit compared to using a PCX first and PCV second, it'll be interesting to see what you find.

Keep the info/pics coming DJ, great project!

[djolek]

First test friday evening.

1 replace de diode and the drivers
2 align all
3 test with the telescope
4 break the laser

After change the diode and did the first test, i did a bad think and i break half at the laser.
I must replace elements. But the divergence is 1.5x more. and in out put i have 3mm squarre (before 6mm squarre)

I hope can change next week and restart the test