Hi,
I am soon to have two nice laser modules ready to sell. They are currently in my RGB projector which is about to undergo a little spa treatment and power boost
The modules have less than 200hrs on them and are both performing up to spec with no drop in output since new...
I am prepared to sell these single or as a pair with a bit of discount...
Module 1:
CNI 532 nm Lab laser rated at 300mw, it is doing about 312 mw and has a very small beam, somewhere in the region of 2mm... this laser is running beautifully and if you have seen my RGB at any of the UKLEM's you will know the quality of this laser... It has a couple of marks on the power supply where it had a couple of straps holding it into the projector but nothing serious.
Looking for £275 plus shipping.. These retail between £417 and £481... The picture below is from CNI's site, but shows the same module and PSU..
Module 2:
Lasever 635 nm Laser rated at 300mw, this is doing between 340 and 355 mw as it warms up. This laser also runs very solidly, nice and stable.. Again this is the same one seen at UKLEM's. The beam is 3mm x 5mm and has 2 x 3mrad divergence as expected at 635nm... Again there are small marks on the PSU from mounting in the projector. This laser is *very* Bright...
Looking for £275 plus shipping.. These are currently retailing between £485 and £513...
I am happy to sell the pair for £530 plus shipping So £20 discount on the pair.. I used these together and apart from the beam profile (Which we come to expect from reds) they are well matched.
Obviously I haven't checked every current price, but went through a fair few...
Just thought I would give you guys first dibs at them...
Mark