Hi, I have been looking around for some scanners and was interested if anyone had experiance or infromation about these:
http://cgi.ebay.co.uk/30K-Laser-Ligh...1%7C240%3A1318
Any advice would be great.
Thanks.
Adrian
Hi, I have been looking around for some scanners and was interested if anyone had experiance or infromation about these:
http://cgi.ebay.co.uk/30K-Laser-Ligh...1%7C240%3A1318
Any advice would be great.
Thanks.
Adrian
I don't know anything about them but I'd have thought a safer bet was something tested on here. Many scanners either don't meet their specified speeds with any quality or do so with only a very narrow angle.
DT25 and DT40 pros have been tested on here and cost £245 and £400 respectively from http://www.laser-wave.co.uk/.
DT25 Review: http://www.photonlexicon.com/forums/...highlight=DT25
Better still, if you can afford the buy it now price on that ebay ad, you could afford some Scanpro 40's from here: http://lasershowparts.com/store/inde...d&productId=69
(BEFORE YOU PANIC THAT'S AUS DOLLARS = £384)
According to Adam's review the Scanpros are significantly better than even the DT 40 Pros and they're cheaper!: http://www.photonlexicon.com/forums/...light=scanners
If I was spending around £380 or so I'd buy the Scanpro 40's. If I couldn't afford that much I'd buy the Scanpro 30's at £314.
Failing that I'd look at the DT 25's.
BTW you haven't said what you want them for, beams or graphics. Graphics demand a better quality of scanner.
Hope this helps.
Last edited by White-Light; 04-03-2009 at 05:41.
Adrian,
Just to chime in: I recently picked up a set of DT25's from Rob (Stanwax) and they are brill. I'd seriously recommend them.
Like most would, if you have the cash go for the DT40Pro's, but otherwise seriously consider the DT25's.
Dan![]()
Hi Adrian,
I have a very similar set of scanners I bought from ebay via ex-member carmangary for approximately $300 USD. They work OK, but for that price, and if I could do it again (which I did), I would buy scanpro 40's or dt40 pro.
I have dealt with DZ and lasershowparts.com and they are both great. Keep an eye out for sales, and don't be afraid to ask for a friendly PL discount
-Mike
Get the DT40s WAY before you go with those... Better yet, take a small loan out and get some CTs...![]()
Love, peace, and grease,
allthat... aka: aaron@pangolin
Haymaker, if you're still around, check out the pictures at the bottom of this thread of the performance of DT40's.
http://www.photonlexicon.com/forums/...ead.php?t=6893
The tell me you want to buy unknown scanners!!
Seriously get the DT's or Scan pros. (DT's usually come pre tuned Scan Pros need some tweeking).
The 30, 40 and 50k scanpro's we sell come well tuned. Cant say the same for the other scanners in that eBay ad. We tried selling them, and more were poorly tuned than well tuned.
KVANT Australian projector sales
https://www.facebook.com/kvantaus/
Lasershowparts- Laser Parts at great prices
https://www.facebook.com/lasershowparts/