Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Logos

  1. #1
    Join Date
    Sep 2007
    Location
    Cape Town, South Africa
    Posts
    95

    Default Logos

    Hi guys I see your in need of a new logo, i did LPF's logo, so now im here to help out. Just one so far, il post some more tomorrow hopefully. Any and all suggestions are welcome..
    Attached Thumbnails Attached Thumbnails Photon.jpg  


  2. #2
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    I posted this in another thread earlier, didn't see this one. Sorry.



    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwinís natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  3. #3
    Join Date
    Sep 2007
    Location
    Cape Town, South Africa
    Posts
    95

    Default

    Oh sorry, i was looking for a similar post, just couldn't find it... Here's another one
    Attached Thumbnails Attached Thumbnails Photon1.jpg  


  4. #4
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,411

    Default

    I think the projected version of the PL logo must at least be scanable at 25kpps at 25 degrees at 25Hz.
    The suggested logos above hardly suffice.

  5. #5
    Join Date
    Jun 2008
    Location
    Yellowknife, NT, Canada
    Posts
    2,147,484,113

    Default

    Quote Originally Posted by SpyroS View Post
    Oh sorry, i was looking for a similar post, just couldn't find it... Here's another one

    I like that one actually. But that's just because I like plain things

    infact, I like Doc's as well.

  6. #6
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,488,805

    Cool

    Quote Originally Posted by -bart- View Post
    I think the projected version of the PL logo must at least be scanable at 25kpps at 25 degrees at 25Hz.
    The suggested logos above hardly suffice.
    Using what scanners? CT 6215HP's?

    At that wide of a scan angle, you're going to be hard pressed to scan all 13 characters at 25Hz with a standard set of 30K galvos, even if you use a simple stick-font, to say nothing about a logo with a more complex font.

    For comparison, I can *just* manage 20 characters at 18 degrees using a very simple single-line stick font with my ScanPro 50's, but only when they're tuned down to 30K speeds. Not sure of the refresh rate, but it's probably around 20 to 25 hz. (See the ending of my "why" graphics show for a demonstration.)

    Adam

  7. #7
    Join Date
    Oct 2006
    Location
    Cleveland, Ohio
    Posts
    2,333

    Default

    Quote Originally Posted by -bart- View Post
    I think the projected version of the PL logo must at least be scanable at 25kpps at 25 degrees at 25Hz.
    The suggested logos above hardly suffice.
    Ask and ye shall receive.. OK not quite. 22.6Hz at 20 degrees at 30kpps for my scanners With just the text and no boxes I was getting around 45 Hz.

    Included are two versions:
    Basic - ILD format 1 default palette. You'll have to apply your own blanking offsets with your display system.
    Enhanced - Ilda format 5 with the 2 point blanking offset that worked for my system.

    Click the picture for ILDA:

    Last edited by drlava; 04-16-2009 at 21:03.

  8. #8
    Join Date
    Dec 2007
    Location
    England, Hertfordshire
    Posts
    333

    Default

    Quote Originally Posted by -bart- View Post
    I think the projected version of the PL logo must at least be scanable at 25kpps at 25 degrees at 25Hz.
    The suggested logos above hardly suffice.
    Can the current logo be scanned at that speed as well then? That is supprising if it can.
    DL - Viper 75mW - Green (532nm)
    DL - 50mW Module - Green (532nm)
    DIY - 50mW - 12k Scanner - Green (532nm)

  9. #9
    Join Date
    Sep 2007
    Location
    Cape Town, South Africa
    Posts
    95

    Default

    We are kind of deviating for the main idea here guys, the forum needs a new logo...
    And to be honest when are you going to need to scan the forum name? besides for fun..hahaha

  10. #10
    soforene's Avatar
    soforene is online now The Troll formerly known as Herbert Von Poople-Futtocks
    Join Date
    Aug 2007
    Posts
    2,915

    Question

    Quote Originally Posted by SpyroS View Post
    ...the forum needs a new logo...
    When was this announcement made?
    I thought you'd just decided to make a new one off your own bat.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •