Hi guys I see your in need of a new logo, i did LPF's logo, so now im here to help out. Just one so far, il post some more tomorrow hopefully. Any and all suggestions are welcome..
Hi guys I see your in need of a new logo, i did LPF's logo, so now im here to help out. Just one so far, il post some more tomorrow hopefully. Any and all suggestions are welcome..
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Oh sorry, i was looking for a similar post, just couldn't find it... Here's another one
I think the projected version of the PL logo must at least be scanable at 25kpps at 25 degrees at 25Hz.
The suggested logos above hardly suffice.
Using what scanners? CT 6215HP's?
At that wide of a scan angle, you're going to be hard pressed to scan all 13 characters at 25Hz with a standard set of 30K galvos, even if you use a simple stick-font, to say nothing about a logo with a more complex font.
For comparison, I can *just* manage 20 characters at 18 degrees using a very simple single-line stick font with my ScanPro 50's, but only when they're tuned down to 30K speeds. Not sure of the refresh rate, but it's probably around 20 to 25 hz. (See the ending of my "why" graphics show for a demonstration.)
Adam
Ask and ye shall receive.. OK not quite. 22.6Hz at 20 degrees at 30kpps for my scanners With just the text and no boxes I was getting around 45 Hz.
Included are two versions:
Basic - ILD format 1 default palette. You'll have to apply your own blanking offsets with your display system.
Enhanced - Ilda format 5 with the 2 point blanking offset that worked for my system.
Click the picture for ILDA:
Last edited by drlava; 04-16-2009 at 21:03.
DL - Viper 75mW - Green (532nm)DL - 50mW Module - Green (532nm)DIY - 50mW - 12k Scanner - Green (532nm)
We are kind of deviating for the main idea here guys, the forum needs a new logo...
And to be honest when are you going to need to scan the forum name? besides for fun..hahaha