The shutter / actuator outputs are generally 5V, but NOT a lot of current, so you don't want to drive an actuator directly UNLESS it has a built-in "signal" input; most folks will trigger a transistor relay driver or solid-state relay with the shutter signal, which in turn would actually control the shutter.
The ILDA specification addresses how a projector should be wired for different control signals, but not all controllers will use all those signals, regardless of the software being used. In the case of the FB3, there aren't any outputs other than laser modulation, shutter, and scanners. DMX control on the FB3 is INPUT only; no output.
Trust me, though - the FB3 coupled with LivePro and it's laser control capabilities (sync to audio, DMX, MIDI) will be more than enough to keep you and your audience entertained for a LONG time!!
Last edited by Stuka; 04-24-2009 at 18:13.
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....