OK, as part of my effort to come up with conversion settings for the SVG to ilda converter I would like to find out how you are using your scanners.
There are two parts to this:
1) To what speed are your scanners tuned?
2) What scan speed do you use the most for shows you design?
Let me explain if it is not exactly clear. Having scanners tuned to 30K does not mean you have to run them at 30K.
For example, my scanners are tuned for 35Kpps ILDA, meaning that is displays the IDLA test patter properly at 35KPPS and at an angle of 8 degrees. However, I like the image quality better when scanning at 24 to 28 kpps. It really depends on how many points the ilda image has in it and the complexity of the image.
My converter can come up with different ilda files that display the *same* image at the *same* frame rate at *different* scanning speeds. The difference is in point count and point placement. The whole idea is that a target speed needs to be chosen for optimal output. This is really not an artifact of the converter but more inherent to the fact that ilda files store a number of points to define smooth curves and corners.
My converter will take the dynamics of the galvos into account for optimal point placement. Meaning that you get complex images at low point counts but optimized for the chosen scan speed.
I hope Bill and others can back me up when I say that a laser show is designed to run on a projector with a fixed tuning speed (e.g. 30kpps ILDA) and a fixed scanning speed (e.g. 28kpps). Deviating form these numbers will distort the images, introduce flicker and so on.
In order to come up with a number of generic settings for the converter I need to know what settings PL members use the most in terms of the above questions.
thanks.


Reply With Quote
)
buffo
