More Laser Junk To Trade...

[300EVIL]

First up is an AWESOME diode driver board. If you want stability this is it! It has a Wavelength Electronics PLD-5000 good for driving a diode up to 5 AMPS! It also has an HTC-3000 TEC driver. The best part is it's brand new! Here is some data on the driver... ftp://ftp.teamwavelength.com/pub/dow.../pldseries.pdf

Will consider partial trade plus cash for a Laserwave green module or a dual red with PBS or dual Blu-ray with PBS. Let me know what you got!





Next!!!

Here's two 110-120VAC red diode power supplies with TTL modulation. One has a dead diode with heatsink and collimator. The other is just a board. Both have wires. Both boards are in perfect working order. SOLD!



Here is some ebay special photodiode power meter. If I remember correctly, it's good for up to 75 or so milliwatts. Just add 9V battery and multimeter!



Next is some MM1 looking mount with some crazy angle piece and a REALLY nice dichroic mirror and some kind of crazy masking rig. The mount is made by Klinger Scientific.

[300EVIL]

Here is some MM2 mount from Newport with a 1 1/4 inch hole in the center.





Here's a Newport MM2 without a crazy hole in the center.



Here's some MM2 with a big bad mirror... Yes the mirror is trashed.





Here's a "REALLY NICE" (fine thread) MM2-1A Unfortunately it's missing one spring and both screws.

[lasersbee]

Hey 300Evil...
your "ebay special photodiode power meter" is an old model Optic LPM

It has been replaced by this model...

http://www.bauer-electron.com/eby/ebayhlpm.htm

If anyone buys/trades your old model "ebay special photodiode power meter"...
We will offer to exchange it for our new model (120mW LPM Module) for FREE.
(shipping will of course need to be paid to the buyer's location)

Jerry

[300EVIL]

Now that's what I call customer support!
Thanks for posting!

[dream beamz]

Here's two 110-120VAC red diode power supplies with TTL modulation. One has a dead diode with heatsink and collimator. The other is just a board. Both have wires. Both boards are in perfect working order.

$30 plus $5 for priority mail

[300EVIL]

$30 plus $5 for priority mail

SOLD!

[wolfblue]

I have that same board with the Wavelength Electronics parts. That one is great for somebody that is building a DPSS. Very accurate and the HTC-3000 could wavelength tune the diode nicely. I bought mine to use the HTC-3000 to run the cavity TEC on a Coherent C315M-100.


--John

[GooeyGus]

I REALLY NEED THAT DIODE DRIVER...

What can I give you?

I have a lot of diodes, but no dual setups.

[300EVIL]

I REALLY NEED THAT DIODE DRIVER...

What can I give you?

I have a lot of diodes, but no dual setups.

HMMM... Start a list of what ya got! Do you have any decent 532 DPSS modules? Cash always works too.

I'm sure we could work out a deal in 4 or 5 PM's back and forth.

Let me know!
Thanks!
Adam

[300EVIL]

TTT