i give me left testical for that scannner
i give me left testical for that scannner
Eat Sleep Lase Repeat
Hint, its simpler then you think. Notice the source ring has a constant diameter. Those photos are looking into or toward the source.
Then think, how would you do a down cone around a performer on stage without using galvos if you had access to a machine shop and hollow shafts and slip rings.
google slip ring or slip rings and generator
I'm shocked they will get a patent on that, it has been done before with a single spinning arm.
Still a beautiful effect
Steve
Last edited by mixedgas; 05-10-2009 at 09:46.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
So...
Would I be right in thinking a ring / thin cylinder with a reflective (perhaps chamfered) edge would be used, keep that rotating, and slowly vary the angle of incidence of the beam.
This would make said cone or variable angle right?
But I don't get how the cone sometimes curves near the point. Is this an artefact due to the camera? or am I still missing something...
Many Thanks,
Dan
Oh, and I bet its legal for audience scanning, or close to legal
Otherwise why do it?
Steve
Last edited by mixedgas; 05-10-2009 at 10:37.
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...
Hello!
16W green to 15W 642nm red is a nice yellow, but still, 7W 445nm blue is not enought for balance.
Normal for a real white balance its ~ 1:1:1 RGB with 642nm red 532nm green and 445nm blue.
So still it should be arround ~21Watts.
Greets,
Phil