Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: Shimming and alignment

  1. #11
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Its all relative though.
    In the quest for 'compact', it doesn't always leave you the luxury of being able to accommodate steering mirrors.
    I may well have to consider shims for the next one, although I'm more likely work out what I need and get someone with equipment to machine some spacer blocks for me to exactly the right height.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  2. #12
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    It seems like some outfit Edmonds Optics or Thorlabs would sell a small footprint double right angle kinematic mount. Most stuff like this I have seen is way too big. Some enterprising machine here on PL could make a killing!

  3. #13
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    two mm1's or flexmounts on a long L-bracket does the trick very nicely.

    designing around a double-bounce layout doesn't take a lot of extra space.

    here's an example from One Stop Laser Shop:

    osls-dichro.jpg


    Quote Originally Posted by blowfly View Post
    It seems like some outfit Edmonds Optics or Thorlabs would sell a small footprint double right angle kinematic mount. Most stuff like this I have seen is way too big. Some enterprising machine here on PL could make a killing!
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  4. #14
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    Quote Originally Posted by swamidog View Post
    designing around a double-bounce layout doesn't take a lot of extra space.
    Exactly!

    Swamidog that example pic you posted is superb. If we bring it up-to-date a bit with the blue in the middle and the red last in order, it is a very space efficient setup

    Norty has also posted some very space efficient projectors using bounce mirrors. If memory serves, he didn't keep the bouncing beams at right angles, so he managed to save even more space.

    Here is one of my own, good for 2.1watt rgb using opnext 642 or 637 diodes, an a140 blue and an cni mgl-h half watter. It is just a couple of cm bigger than an A4 piece of paper. I could make it smaller I guess, but no need to. It is already small enough.

    http://www.photonlexicon.com/forums/...chmentid=30668

    "its called character briggs..."

  5. #15
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    An L-bracket makes a lot of sense. I am currenting using those big kinematic mounts and I can see how using smaller MM-1s or flexmounts on an L-bracket would make alignment easier. Swami I still have that MM-1 mount you gave me at Paclem a year ago. I'm finally going to replace the micromount!

    Mike

  6. #16
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    hey cool! i forgot all about that.

    don't go starting rumors that i'm helpful and generous.. that would totally ruin my reputation.

    by the way, pat (laserman532) is selling exactly the kind of mounts you need for compact beam height adjustments:

    http://www.photonlexicon.com/forums/...623#post245623

    Quote Originally Posted by blowfly View Post
    An L-bracket makes a lot of sense. I am currenting using those big kinematic mounts and I can see how using smaller MM-1s or flexmounts on an L-bracket would make alignment easier. Swami I still have that MM-1 mount you gave me at Paclem a year ago. I'm finally going to replace the micromount!

    Mike
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  7. #17
    Join Date
    Dec 2009
    Location
    Seattle, Wa
    Posts
    413

    Default

    The double rail hole looks perfect for two mounts to do beam height adjustment. Do you know if height adjustment can be done with a single slot? I sent Pat a PM and emailed One Stop Laser Shop about L-brackets too. Thanks for the connection. I'm psyched to finally clean up my alignment!

    Mike

    Quote Originally Posted by swamidog View Post
    by the way, pat (laserman532) is selling exactly the kind of mounts you need for compact beam height adjustments

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •