machine shop supply places sell brass, steel, and plastic shim stock, and then you can use heatsink grease or silver loaded grease, or silver epoxy if you really need additional heat conduction.
So you are looking for "shim stock" comes in thousandths of a inch in the US, ie 3 thou, 10 thou, 30 thou, 60 thou etc.
Dont know how they do it in metric, but it will be similar.
Its cheap and you can usually cut it with sharp scissors or a paper cutter if you get the brass or plastic.
I dont know what their overseas shipping would be, but I get mine from Small Parts, www.smallparts.com. Small parts is a tad expensive. I also get it from McMaster Carr, and I'm sure there is a similar company in the UK.
Steve
Qui habet Christos, habet Vitam!
I should have rented the space under my name for advertising.
When I still could have...