Coherent LM-30V Laser Power Detector Head

[Laser Ben]

Hey All, up for sale here is a Coherent LM-30V 30W thermal power sensor. It's new from calibration. It was calibrated just over a month ago on 4-8-09 so it is good for a year from then. The detector has not been used since it was recieved. I was not the one to send it to callibration, I bought it from someone who had it sent. Strangly enough, he only had the documents from when it was bought new in 2004. It sat on a shelf and was never used since then so it is effectivly a new sensor.

In addition to the sensor, you also get a replacement absorber kit incase you manage to pull a lasernerd and scrach the detector The sensor is NOT scrached and will not be when you recieve it.

I believe the sensor will measure down to a milliwatt, but I have not tested it. My old LM-30 measured to 10mW so I don't know if they improved them or not Additionally, the sensor is position sensing so it can can record beam location and drift with the correct Coherent Meter. This is compatable with any Coherent meter using a smart sensor connection (the 25 pin connector)

This sensor was $1250 new and the callibration costs about $200. I would like to get $550 for the sensor with the detector replacement kit and the callibration papers. I can guarentee that the sensor is working and has no scraches when you recieve it.

[Lasernerd]

brand new on sale much better than old stock!
http://www.coherent.com/Lasers/index...e&ID=1623&loc=

not that good of a deal there benny boi,,do some research before you SCAM PL members

ohhh ahhh nice PM,,should I report it??? hmmm

nice spelling benny boy

[Lasernerd]

Hey All, up for sale here is a Coherent LM-30V 30W thermal power sensor. It's new from calibration. It was calibrated just over a month ago on 4-8-09 so it is good for a year from then. The detector has not been used since it was recieved. I was not the one to send it to callibration, I bought it from someone who had it sent. Strangly enough, he only had the documents from when it was bought new in 2004. It sat on a shelf and was never used since then so it is effectivly a new sensor.

In addition to the sensor, you also get a replacement absorber kit incase you manage to pull a lasernerd and scrach the detector The sensor is NOT scrached and will not be when you recieve it.

I believe the sensor will measure down to a milliwatt, but I have not tested it. My old LM-30 measured to 10mW so I don't know if they improved them or not Additionally, the sensor is position sensing so it can can record beam location and drift with the correct Coherent Meter. This is compatable with any Coherent meter using a smart sensor connection (the 25 pin connector)

This sensor was $1250 new and the callibration costs about $200. I would like to get $550 for the sensor with the detector replacement kit and the callibration papers. I can guarentee that the sensor is working and has no scraches when you recieve it.

hmmm 1250$? where did you get your info? scam the laser community.

So you say this will work with the FieldMaster series of LPM's 25 pin or the PowerMax series 25 pin smart sensor?

[Lasernerd]

maybe take it over to laser pen forums

[Diachi]

brand new on sale much better than old stock!
http://www.coherent.com/Lasers/index...e&ID=1623&loc=

not that good of a deal there benny boi,,do some research before you SCAM PL members

ohhh ahhh nice PM,,should I report it??? hmmm

nice spelling benny boy

Did you not read the website ?

The following overstock items are offered at a discount off from our regular list pricing

Why don't you sort out things with the buyers who YOU screwed over,BEFORE coming and pulling up anyone else up.

[Lasernerd]

Did you not read the website ?

Why don't you sort out things with the buyers who YOU screwed over,BEFORE coming and pulling up anyone else up.

yep been overstock for the past year!!

go play somewhere else Diachit!

Buyer(s)?? what are you talking about

[Laser Ben]

Again, you are just proving you can be an ass. I asked you to stay out of my threads publicly, you still insisted on posting useless shit in my threads, so I sent you a little more harsh message. You proceed to reply to that with more of your childish tantrums. Lets post a quote from your most recent message...

Momma titty still good yah!

do PL a favor and LEAVE you would make many happy,,,before I leave I am forwarding you the pm'zzzz

Get a girlfriend or boyfriend boi you ARE NOT LIKED OR WANTED HERE!>>>>>>>>>>......<<<<<<<
get it period like your mouth

Tell me, what do you hope to gain by sending me stuff like that? YOU ripped people off. YOU failed to make good on the deals. YOU insulted people in public. YOU sent rude emails to people who did nothing to you. YOU have been an ass. YOU are not wanted here. YOU said you would leave. YOU failed to do that.

[daedal]

Hehe! That PM looks like something a 5 year old would send... LOL!

Is that real?

--DDL

[Laser Ben]

Yes, it is real. Not all of it is there. Here is the full message. And yes, my message was pretty harsh, but it was not my first time requesting he stay out of my threads, and he was actively trying to piss me off.

STAY THE FUCK OUT OF MY THREADS!!!

Ben

BWAAAAAAAAAAAAAAAAAAA HHHHHAAAAAAAAAAAA LOLLLLLLLLLLLLLLLL ROFLLLLLLLLLLLLLL

got you!!

punk,I could careless if i get banned

You are not far behind you should see all my PM'ssssszzzzzzzzzzzz

Momma titty still good yah!

do PL a favor and LEAVE you would make many happy,,,before I leave I am forwarding you the pm'zzzz

Get a girlfriend or boyfriend boi you ARE NOT LIKED OR WANTED HERE!>>>>>>>>>>......<<<<<<<
get it period like your mouth

[daedal]

Mark... I hope this helps

https://www.find-a-therapist.com/

--DDL